Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Country of Origin
- Product Code
- MITM04833
- Technologies
- Product Families
Features & Benefits
- Fluids & Lubricants Features
- Product Advantages
Specific advantages offered by lubricants diluted with BONDERITE® L-GP 2404 ACHESON (known as Dag 2404) include:
- Reduced metal-to metal contact
- Nonfreezable
- Effectiveness at extreme temperatures
- Minimum pre-treatment
- High Lubricity
- Easy application
- Extremely low residue
BONDERITE® L-GP 2404 ACHESON (known as Dag 2404) is noted for extremely low residue formation when mixed with a quality diluent.
- Product Benefits
- Minimal mixing costs for blending into your finished lubricant
- Provides cost-effective usage in finished lubricant to provide superior lubrication performance, consumer confidence and repeat sales
- Superior lubrication extends equipment life, reduces maintenance costs and lubricant intervals
- Minimizes formulation costs for achieving stable and effective product
- Product Features
- Stable colloidal suspension of graphite
- Fine particle size distribution
- Lubricating, low friction graphite particles
- Robust chemical and base oil compatibility
Applications & Uses
- Application Method
- Fluids & Lubricants End Use
- Fluids & Lubricants Type
- Markets
- Applications
- Processing Information
Method of Use:
Surface Preparation: When evaluating BONDERITE® L-GP 2404 ACHESON (known as Dag 2404) on a bearing application, the bearing surface should be thoroughly cleaned by chemical rinse or any practical method available. The graphite particles must come in contact with the metal for good adhesion and effective lubrication. If cleaning is not feasible, several liberal applications are recommended during the initial break-in period.
Dilution:
BONDERITE® L-GP 2404 ACHESON (known as Dag 2404) can be diluted with any compatible petroleum product, such as: conventional oils, kerosene, mineral seal oil, mineral spirits, petroleum oil, and Stoddard solvent. The diluent and dilution ratios are usually finalized on the job. However, typical recommendations for initial evaluations are:
Weight Ratio Application Diluent product:diluent Conveyor Chain (continuous application) Kerosene or Mineral Seal Oil 1:50 Conveyor Chain (intermittent application) Kerosene or Mineral Seal Oil 1:20 Kiln Car Wheel Bearings Kerosene 1:20 Application: Agitate or stir BONDERITE® L-GP 2404 ACHESON (known as Dag 2404) to a uniform consistency before diluting and again just prior to application. BONDERITE® L-GP 2404 ACHESON (known as Dag 2404) can then be applied by spray, brush, or drip, whichever method is suitable for the job. Overspray and spills are easily cleaned up with detergent solution.
Properties
- Physical Form
Packaging & Availability
Principal Information
- Group Principal Number
- S000218
- Principal
Storage & Handling
- Storage Conditions
Keep container closed when not in use to avoid contamination. Shelf life is 12 months from date of qualification under original seal.
Other
- Appearance (SDS)
- Liquid
- Color
- Black
- Color (SDS)
- Black
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Mild
- Other Hazards
- Excessive inhalation of this material causes headache, dizziness, nausea and incoordination. Repeated exposure may cause skin dryness or cracking. Dermatitis. Exposure to vapor may cause tearing of the eyes, irritation and burning sensation. May irritate mouth, throat, and stomach if swallowed. May cause central nervous system depression. Extreme overexposure may result in unconsciousness and possibly death.
- USA/DOT Proper Shipping Name
- Combustible liquid, NOS
- USA/DOT UN Number
- NA1993
- Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 12.0 mo mo - Physical Properties
Value Units Test Method / Conditions Density 0.852 kg/L kg/L At 25°C Flash Point 43.0 °C °C Particle Size 2.0-4.0 µm µm by volume, Median Viscosity 11.0-14.0 cPs cPs at 25°C, #4 ford cup - Material Composition
Value Units Test Method / Conditions Solid Content min. 10.0 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 279.4 °C °C Flash Point (SDS) 40.5 °C °C Tag Closed cup Freeze Point (SDS) -70.0 °C °C Initial Boiling Point (SDS) 157.0-203.0 °C °C Specific Gravity (SDS) 0.83 - Vapor Pressure (SDS) 2.0 mm Hg mm Hg Viscosity (SDS) 5.0-75.0 cPs cPs