Products

ROSHIELD™ 636 is a hard, styrene-acrylic polymer that offers one-component, self-crosslinking technology for kitchen cabinets, for sealers and topcoats in molding formulations, and any interior board application. Coatings based on ROSHIELD 636 Emulsion exhibit outstanding mar, print, and block resistance without the limitation of pot life. The excellent color retention of ROSHIELD 636 Emulsion makes it an excellent choice for use over white and light colored basecoats. It offers very good ammonia resistance, is highly resistant to a wide range of stains and chemicals, and has unsurpassed humidity resistance.

CYMEL® UI-19-I resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties provide good block resistance and makes CYMEL® UI19-I resin suitable for ambient and low bake industrial wood finishes.

PARALOID™ B-48S 45% Resin has excellent adhesion to bare and primed metals and possesses outstanding toughness, flexibility, and exterior durability. PARALOID™ B-48S 45% Resin Thermoplastic Solution Resin (45%) has excellent block resistance and fast solvent release, and it is well suited for both air-dried and force-dried finishes. It is supplied at 45% solids in toluene and is also available in a solid grade (PARALOID™ B- 48N Solid Grade Thermoplastic Acrylic Resin).

MAINCOTE™ 4950 Resin is an aqueous acrylic emulsion polymer that facilitates the formulation of coatings to less than or equal to 50 g/L VOC for use in light to medium duty maintenance and protective coatings applications and general industrial metal finishing applications. It offers excellent exterior durability and corrosion resistance, and ease of formulation with excellent paint stability. MAINCOTE 4950 Resin offers improved corrosion resistance versus current direct-to-metal (DTM) finish coats formulated below 100 g/L. It also offers good architectural gloss and trim paint properties. Low coalescent demand allows compliance with stringent VOC regulations.

ROSHIELD™ 3188 is a self-crosslinking acrylic copolymer designed for use in factory-applied, waterborne, interior wood coatings. It offers good early sandability, block resistance, and stain resistance, as well as extremely low microfoam entrapment. ROSHIELD™ 3188 is recommended for sanding sealers and clear topcoats, and offers excellent clarity and appearance over both dark and light woods. Its self-crosslinking chemistry is responsible for its rapid cure and excellent stain resistance.

CYMEL® UI-20-E Resin is a partially iso-butylated urea crosslinker designed for use in acid curing wood coatings with high film build requirements. Being supplied in ethanol, films dry very quickly resulting in coatings with excellent early block resistance.

CYMEL® U-663 resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties combined with very good block resistance makes CYMEL® U-663 resin suitable for acid curing wood coating applications where low formaldehyde emission and high film gloss is required.

PARALOID™ B-66 100% Resin thermoplastic acrylic resin is an excellent general-purpose resin with the same characteristics as the solution grade. In appropriate solvents, PARALOID™ B-66 100% Resin acrylic resin forms clear solutions, which air-dry extremely fast to form hard, colorless films which display excellent block resistance and color retention.

RHOPLEX® VSR-50 is a 100% acrylic latex designed for premium architectural flat to gloss interior and exterior coatings. Its low coalescent demand allows the formulator to meet 50 g/L VOC regulations with some freeze-thaw capability. RHOPLEX® VSR-50 offers excellent surfactant leaching, water resistance properties, and alkali resistance. It provides proven superior exterior durability after several years of exposure over a variety of substrates such as wood, metal, and masonry for dirt pick-up resistance, efflorescence resistance, crack resistance, and tint retention. It is easy to formulate, slurry compatible, and has good block resistance.

EMULSION E-2353 is a hard, all acrylic emulsion designed for use in factory-applied, waterborne, interior and exterior wood coatings. Its self-crosslinkable chemistry offers good exterior durability and is recommended for interior/exterior primers and topcoats. If EMULSION E-2353 is too hard, it can be blended with a soft polymer, such as RHOPLEXTM AC-261. It can also be reacted with melamine formaldehyde resins, the combination of which offers an extremely durable finish, ideally suited for long-term warranty applications.

MAINCOTE™ 5045C Emulsion is an aqueous acrylic emulsion polymer based on AVANSETM Acrylic Resin Technology. It facilitates the formulation of coatings to less than or equal to 25 g/L VOC for use in light to medium duty industrial maintenance and protective coatings applications. It offers excellent UV durability, corrosion resistance, block resistance, and ease of formulation with excellent paint stability. It can be formulated into highly durable topcoats and high gloss direct-to-metal (DTM) finish coats. When formulated at 25 g/L VOC or below, MAINCOTE™ 5045C Emulsion offers improvements in these properties versus many current DTM finishes formulated at higher VOC levels of 100 g/L and above. The low coalescent demand of MAINCOTE™ 5045C Emulsion allows compliance with stringent VOC regulations. MAINCOTE™ 5045C contains no intentionally added APEO (alkylphenol ethoxylate) surfactants and no intentionally added PFAS.

RHOPLEX® CL-104 Waterborne Acrylic Copolymer, yield clear wood coatings which shed water and coalescent rapidly, resulting in excellent early print resistance properties. However, in extreme ambient conditions (temperatures approaching 100°F (38°C) and/or very low relative humidity), some of these first generation print-resistant products can trap bubbles when spray applied, causing film haze and clarity loss. In contrast, RHOPLEX® CL-204 Acrylic Emulsion is specifically engineered to minimize this microfoam entrapment by slowing the film-set process which occurs under extreme ambient conditions, while still maintaining acceptable early print resistance properties.