Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Binder
- Product Code
- MITM11400
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Key Features and Benefits
- Multi-substrate capability—wood, aluminum, vinyl, masonry, and composites
- Excellent surfactant leaching and water resistance performance
- Excellent alkali and efflorescence resistance
- Exterior durability:
- Dirt pick up resistance, tint retention, grain crack resistance, gloss retention
- Good block resistance
- Very good gloss potential
- Excellent slurry compatibility
- Less than 50 g/l VOC capable
Applications & Uses
- Application Area
- Coating End Applications
- Compatible Substrates & Surfaces
- Markets
- Applications
Properties
- Physical Form
Regulatory & Compliance
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000005
- Principal
Storage & Handling
- Storage Information
Store products in tightly closed original containers at temperatures recommended on the product label.
- Handling Information
- CAUTION! Keep combustible and/or flammable products and their vapors away from heat, sparks, flames and other sources of ignition including static discharge. Processing or operating at temperatures near or above product flashpoint may pose a fire hazard. Use appropriate grounding and bonding techniques to manage static discharge hazards.
- CAUTION! Failure to maintain proper volume level when using immersion heaters can expose tank and solution to excessive heat resulting in a possible combustion hazard, particularly when plastic tanks are used.
- Dispose in accordance with all local, state (provincial) and federal regulations. Empty containers may contain hazardous residues. This material and its container must be disposed in a safe and legal manner.
Other
- Appearance
- Milky white liquid
- Color (SDS)
- White
- Item Number
- Odor (SDS)
- Ammonia
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions pH 7.5-8.5 - - Physical Properties
Value Units Test Method / Conditions Bulking Value 0.106 gal/lb dry basis Density 8.75-8.85 lb/gal Glass Transition Temperature (Tg) 12.0 °C Specific Gravity 1.0-1.09 - Viscosity max. 500.0 cPs - Material Composition
Value Units Test Method / Conditions Solid Content 45.0-46.0 % Volatile Organic Compounds (VOC) max. 50.0 g/L - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 100.0 °C Evaporation Rate (SDS) max. 1.0 % Butyl acetate = 1 Melting Point (SDS) 0.0 °C Relative Vapor Density (SDS) max. 1.0 - Air = 1 Specific Gravity (SDS) 1.0-1.3 - Water = 1 Vapor Pressure (SDS) 17.0 mm Hg at 20°C Viscosity (SDS) 50.0-600.0 mPa.s Volatile Content (SDS) 54.0-55.0 % Water pH (SDS) 7.5-8.5 -