Products

AP 5805 is an undiluted clear bifunctional liquid epoxy resin produced from bisphenol A and epichlorohydrin.

AP 5223 is a reactive polyamidoamine hardener for epoxy resins based coatings.

EBECRYL® 8409 is a low viscosity aliphatic urethane diacrylate. Films of EBECRYL® 8409 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and excellent exterior durability. Low viscosity coatings or enhanced performance via increased oligomer content are possible with EBECRYL® 8409. Note that EBECRYL® 8409 typically develops a semi-crystalline aspect upon storage.

EBECRYL® 8501 is an aliphatic urethane acrylate designed for use in automotive refinish and general metal applications. Films of EBECRYL® 8501 exhibit a unique blend of flexibility and toughness coupled with good corrosion resistance. EBECRYL® 8501 contains isobornyl acrylate (IBOA)(1) as a reactive diluent.

EBECRYL® 8413 is designed as the pigment grind oligomer for UV cured thermoformable ink applications and is designed for use in conjunction with the letdown oligomer, EBECRYL® 1300. EBECRYL® 8413 exhibits good milling properties and has very high elongation (550%). When used together with EBECRYL® 1300, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.

EBECRYL® 130 is a cyclic aliphatic diacrylate useful as a reactive diluent in UV (ultraviolet) or EB (electron beam) curable coatings and inks. EBECRYL® 130 can impart a combination of hardness, toughness, and resiliency coupled with improved adhesion properties on various substrates. EBECRYL® 130 can also significantly increase the Tg of cured polymers. EBECRYL® 130 is particularly useful for scratch resistant coatings an plastics and as a pigment grinding vehicle for UV inkjet inks.

EBECRYL® 629 is an acrylated epoxy novolac diluted with the reactive diluents trimethylolpropane triacrylate (TMPTA) and hydroxyethyl methacrylate (HEMA). When cured via ultraviolet light (UV) or electron beam (EB), EBECRYL® 629 exhibits high surface hardness, good heat resistance, low shrinkage, and good adhesion to metal, particularly copper. This resin was specifically designed for UV cure solder resist applications.

IBOA is a monofunctional reactive diluent that polymerizes when exposed to sources of free radicals. The bicyclic structure of IBOA gives rise to polymers of increased Tg, while its monofunctionality minimizes crosslinking to provide coatings and inks with good hardness and resiliency combined with flexibility and impact resistance.

D.E.N.® 438 is a general purpose, widely used epoxy novolac resin.

D.E.N.® 439-EK85 is a semi-solid reaction product of epichlorohydrin and phenol formaldehyde novolac in methyl ethyl ketone.

D.E.R.® 330 liquid epoxy resin is a reaction product of epichlorohydrin and Bisphenol A.

D.E.N.® 438-MK75 is a solution of a semi-solid reaction product of epichlorohydrin and phenol-formaldehyde novolac in methyl isobutyl ketone.

D.E.N.® 440 is a high functional epoxy novolac resin.

D.E.N.® 425 is a liquid reaction product of epichlorohydrin and phenol-formaldehyde novolac. D.E.N.® 425 Epoxy Novolac Resin is an epoxidized phenolic resin of higher functionality than standard bisphenol Abased liquid epoxy resins. Epoxy novolac resins combine, in one molecule, the thermal stability of a phenolic backbone with the reactivity and versatility of an epoxy. They are distinguished by particular good thermal stability, mechanical strength and resistance against chemicals. They find ready acceptance for lining pipelines, storage tanks and pumps. D.E.N.® 425 Epoxy Novolac Resin has been developed to fill the gap between the two functional standard bisphenol F based liquid epoxy resins and the high viscous epoxy novolac resins. It has a viscosity similar to a standard bisphenol A based liquid epoxy resin. The multi-functionality, ± 2.5 epoxy groups per mole, of D.E.N.® 425 Epoxy Novolac Resin produces a more tightly cross-linked cured system than bisphenol A based liquid epoxy resins having improved high temperature performance and improved resistance against various chemical.

D.E.N.® 428 is a liquid reaction product of epichlorohydrin and phenol-formaldehyde novolac.