Products

EBECRYL® 8604 is an aliphatic urethane tetraacrylate. As the main resin, EBECRYL 8604 offers excellent reactivity combined with good hardness and toughness. As a co-resin, EBECRYL 8604 blended with higher functional (penta or greater) oligomer(s) improves reactivity and weatherability while increasing the ductility with minimum impact surface hardness. Films of EBECRYL 8604 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, hardness, and excellent exterior durability.

Castung™ 403 Z-3 is a bodied dehydrated castor oil (DCO) that can be used with pure and modified phenolic resins to impart alkali resistance for can linings, corrosion resistant coatings, traffic paints, ink vehicles and marine finishes. The high viscosity Castung™ 403 Z-3will yield faster processing and drying times than Castung™103 G-H. Castung™ 403 Z-3 is excellent for formulating alkyd and copolymer resins, where dehydrated castor oil is well known for its non- yellowing and outstanding color retention characteristics.

EBECRYL® 8315 is an aliphatic urethane tetraacrylate diluted with the reactive diluent hydroxypropyl methacrylate (HPMA). Films of EBECRYL® 8315 cured by ultraviolet light (UV) or electron beam (EB) have a unique combination of hardness, toughness, flexibility, and abrasion resistance coupled with outstanding exterior durability properties. These performance properties make EBECRYL® 8315 ideal for applications such as paint protection, printed electronics, automotive interior film and embossing or thermoforming after cure.

SS-07 is energy conservation materials, environmental and safety. Non-toxic, no smell and free of heavy metals.

EBECRYL® 8807 is an aliphatic urethane diacrylate that exhibits rapid surface cure response, light color and moderate viscosity. Films of EBECRYL® 8807 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness, abrasion resistance, and are resistant to yellowing.

EBECRYL® 8809 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL 8809.) Films of EBECRYL 8809 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and resistance to yellowing. EBECRYL LEO 10501 is present at 5% in this product.

EBECRYL® 286 is an aliphatic urethane diacrylate oligomer diluted 25% with tripropylene glycol diacrylate (TPGDA) monomer. Films of EBECRYL® 286 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and flexibility, as well as the non-yellowing properties typical of an aliphatic urethane.

EBECRYL® 1200 is an acrylate functional acrylic resin supplied in 45% by weight of butyl acetate. Upon evaporation of the solvent, films of EBECRYL® 1200 are physically dry and tack-free and after UV/EB curing are hard and chemical resistant without embrittlement. The viscosity and cured properties can be adjusted with the addition of reactive diluents such as 1,6-hexanediol diacrylate (HDDA), isobornyl acrylate (IBOA), trimethylolpropane triacrylate (TMPTA), and tripropylene glycol diacrylate (TPGDA). A suitable photoinitiator must be added for polymerization with UV energy

EBECRYL® 284 is an aliphatic urethane diacrylate diluted 12% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). Films of EBECRYL® 284 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and flexibility, and are resistant to yellowing.

EBECRYL® 8409 is a low viscosity aliphatic urethane diacrylate. Films of EBECRYL® 8409 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and excellent exterior durability. Low viscosity coatings or enhanced performance via increased oligomer content are possible with EBECRYL® 8409. Note that EBECRYL® 8409 typically develops a semi-crystalline aspect upon storage.

EBECRYL® 246 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL 246.) Films of EBECRYL 246 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion resistance, toughness and flexibility, and are resistant to yellowing.

EBECRYL® 8702 is an aliphatic urethane hexaacrylate that offers a multitude of performance properties allowing the formulator the flexibility to meet requirements. Films using EBECRYL® 8702 cured by ultraviolet light (UV) or electron beam (EB) exhibit a combination of hardness, abrasion and impact resistance coupled with good exterior durability.

EBECRYL® 8411 is an aliphatic urethane diacrylate diluted 20% by weight with the reactive diluent isobornyl acrylate (IBOA). Films of EBECRYL® 8411 cured by ultraviolet light (UV) or electron beam (EB) exhibit exceptional extensibility and flexibility, in addition to excellent abrasion resistance, good adhesion, exterior durability and resistance to yellowing.

EBECRYL® 270 is an aliphatic urethane diacrylate. Films of EBECRYL 270 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, adhesion, abrasion resistance, exterior durability, and are resistant to yellowing.

EBECRYL® 8314 is an aliphatic urethane tetraacrylate diluted with the reactive diluents isobornyl acrylate (IBOA) and hydroxy propyl methacrylate (HPMA). Films of EBECRYL® 8314 cured by ultraviolet light (UV) or electron beam (EB) have a unique combination of hardness, toughness, flexibility, and abrasion resistance coupled with excellent exterior durability properties. These performance properties make EBECRYL® 8314 ideal for applications such as paint protection, printed electronics, automotive interior film and embossing or thermoforming after cure.