Products

C9-11 Acids are high purity, conjugated drying oil acids for alkyd resins, epoxy esters and copolymers requiring a combination of flexibility, adhesion, baking speed, color retention, chemical resistance, mar resistance and water resistance. The C9-11 Acids contain a negligible amount of linolenic acid, a yellowing factor, and a combined oleic and saturated acid content of less than 10%. There are no rosin acids or unsaponifiable matter present.

Additin® RC 9321 D is a ashless multifunctional oxidation and rust inhibiting additive package for Turbine, Rand;O and Compressor Oils.

ZHENGDA® ZM-1207 is a monoamine based on a copolymer backbone. ZHENGDA® ZM-1207 polyetheramine is a monofunctional, primary amine with an average molecular weight of about 2,000. The propylene oxide/ethylene oxide (PO/EO) mol ratio is 10/31.

APODIL 1018 is a low viscosity, aliphatic diepoxide reactive diluent based on Neopentyl glycol. It is compatible with all types of epoxy resins in any proportion.

Clearstrength® 303H is a methyl methacrylate-butadiene-styrene (MBS) core-shell impact modifier designed to impart excellent combination of impact strength and transparency to PVC film and sheets.

EBECRYL® 8413 is designed as the pigment grind oligomer for UV cured thermoformable ink applications and is designed for use in conjunction with the letdown oligomer, EBECRYL® 1300. EBECRYL® 8413 exhibits good milling properties and has very high elongation (550%). When used together with EBECRYL® 1300, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.

PIGMENT YELLOW E4GN /OF is an organic pigment of the azo-nickel-complex chemical family, used as a pigment in case ingredient applications.

EBECRYL® 130 is a cyclic aliphatic diacrylate useful as a reactive diluent in UV (ultraviolet) or EB (electron beam) curable coatings and inks. EBECRYL® 130 can impart a combination of hardness, toughness, and resiliency coupled with improved adhesion properties on various substrates. EBECRYL® 130 can also significantly increase the Tg of cured polymers. EBECRYL® 130 is particularly useful for scratch resistant coatings an plastics and as a pigment grinding vehicle for UV inkjet inks.

XIBOND® 220 is a reactive additive to improve the blend morphology of polymer blends. This additive is a random copolymer of styrene and maleic anhydride.

NACOL 18-98 RSPO-MB is a natural, plant and vegetable origin ingredient used in personal care applications.

Hybase® C500 is a 500 TBN oil soluble overbased calcium sulfonate. It provides the highest TBN of calcium carbonate available in a liquid, oil based format. Hybase® C500 is a typically used as a detergent and rust inhibitor in crankcase lubricants. It is designed as a both a stand alone detergent as well as in conjunction with other detergent types, such as calcium phenate.

EBECRYL® 8800 is an aliphatic urethane acrylate diluted with 10% by weight of the reactive diluent ethoxyethoxyethyl acrylate (EOEOEA). Films of EBECRYL® 8800 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion resistance, toughness, rapid cure response and resistance to yellowing.

BONDERITE® S-FN EB-012 ACHESON is one in a series of conductive coatings designed to provide controlled electrical properties. BONDERITE® S-FN EB-012 ACHESON is an application versatile, single component, water based dispersion of graphite in a thermoplastic binder that offers an extremely flexible coating with low resistance at a low cure temperature. The coating will provide a conductive, chemical-resistant coating that will withstand the environment inside of a lithium-ion polymer battery. With proper dilution, BONDERITE® S-FN EB-012 ACHESON can be applied by spray, brush, roll, or print methods. Once properly cured, the coating provides a tenacious, chemical and solvent resistant coating for most metal substrates.