Products

RHOPLEX® HG-1630 is a binder and resin used in architectural coatings, automotive OEM coatings, automotive and transportation, industrial applications, and paints and coatings. It functions as a binder.

EBECRYL® 8296 is an aliphatic urethane acrylate designed for use in applications requiring haptic properties (e.g. “soft touch”). Films of EBECRYL® 8296 cured via exposure to ultraviolet light (UV) or electron beam (EB) are soft, flexible, and resistant to yellowing coupled with high surface tack.

EBECRYL® 605/40 is a bisphenol A epoxy diacrylate diluted approximately 40% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 605/40 exhibits light color and fast cure response. Films of EBECRYL 605/40 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and superior chemical resistance.

EBECRYL® 3701-20T is the modified bisphenol A epoxy diacrylate, EBECRYL 3701, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1) to provide a lower viscosity, easier handling product. Films of EBECRYL® 3701-20T cured by ultraviolet light (UV) or electron beam (EB) exhibit flexibility, abrasion resistance, high gloss, and superior chemical resistance.

RHOPLEX® AC-261LF is an all-acrylic emulsion polymer for latex floor paints. Its adhesion and abrasion resistance have been designed for this application. It is also suitable for quality exterior semi-gloss trim paints.

EBECRYL® 809 is a modified polyester acrylate designed to exhibit greater flexibility and impact resistance than typical polyester acrylates. Films of EBECRYL® 809 cured by ultraviolet light (UV) or electron beam (EB) provide good flexibility, high gloss, toughness and surface hardness.

RHOPLEX® HG-700 is an aqueous, 100% acrylic polymer designed for interior and exterior, VOC compliant, gloss and semigloss enamels. This binder uses ambient temperature self-crosslinking technology to offer improved enamel performance versus conventional latex polymers. The combination of an all-acrylic backbone and ambient cure crosslinking technology offers excellent performance in gloss and semi-gloss formulations at VOC levels under 150 g/L. Gloss enamels based on RHOPLEX® HG-700 offer durable coatings with excellent adhesion, block resistance, and stain removal. Suitable applications include factory applied topcoats for wood and wood composite materials such as joinery and siding products.

AVANSE™ MV-100 represents the latest technology in waterborne acrylic polymers for high performance and low VOC industrial maintenance coatings. It provides formulators with a single resin which can be formulated into corrosion-resistant primers, highly durable topcoats, and high gloss direct-to-metal (DTM) finish coats. The novel technology behind the AVANSE™ Resins product line leads to new standards in film gloss, durability, corrosion control, chemical and solvent resistance, and adhesion. One aspect of this new technology is the formation of latex-pigment composite particles, which gives more homogeneous pigment distribution and results in enhanced corrosion resistance. Also, combining a novel polymer composition and the ability to self-crosslink after film formation, AVANSE™ MV-100 Resin offers the ability to formulate high performance coatings with volatile organic content (VOC) at or below 100 g/L. The favorable colloidal stability of AVANSE™ MV-100 Resin accommodates a broad range of formulation types, providing the formulator with a versatile binder for a variety of applications. Formulation robustness, along with 50-51% weight solids, allows the formulator to produce coatings with volume solids above conventional waterborne binders.

Tetrahydrofuran is a precursor and solvent used in chemical manufacturing, industrial and assembly adhesives, industrial coatings, and resin manufacturing.

Toyal 7150N is a medium-coarse particle sized non-leafing aluminum pigment, with irregular flake geometry. It is a mixture of mineral spirits and high aromatic solvents.

EBECRYL® 3702 is a fatty acid modified bisphenol A epoxy diacrylate that exhibits outstanding flow and leveling and pigment wetting properties. Films of EBECRYL® 3702 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, improved water resistance and good chemical resistance.

RHOPLEX® HG-706 is the new binder is designed for interior and exterior VOC compliant gloss and semigloss enamels, allowing formulators to produce high-performance coatings at 50 g/l VOC. RHOPLEX® HG-706 takes advantage of innovative technology to improve enamel performance over that of conventional latex polymers. The combination of an all-acrylic backbone and ambient-cure crosslinking technology provides superior performance in formulations ranging from 50 to 150 g/l VOC. Enamels based on RHOPLEX® HG-706 provide excellent adhesion, block, and stain removal.

EBECRYL® 3600 is an amine modified bisphenol A epoxy acrylate that exhibits exceptionally fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 3600 cured by UV or electron beam (EB) demonstrate high gloss and hardness combined with excellent chemical resistance. The amine modification can also improve adhesion to plastics.

CYMEL® 1141 Resin is a highly methylated/iso-butylated, carboxy-modified melamine crosslinker supplied in iso-butanol. CYMEL® 1141 Resin is especially designed for electro-deposition primer formulations requiring excellent corrosion and resistance properties. CYMEL® 1141 Resin contains chelating groups which can form colored compounds with heavy metal ions such as iron and zinc. For that reason it is recommended to use CYMEL® 1141 Resin only in dark single coat applications or primers and not in pastel colors.

RHOPLEX® CL-104 Waterborne Acrylic Copolymer, yield clear wood coatings which shed water and coalescent rapidly, resulting in excellent early print resistance properties. However, in extreme ambient conditions (temperatures approaching 100°F (38°C) and/or very low relative humidity), some of these first generation print-resistant products can trap bubbles when spray applied, causing film haze and clarity loss. In contrast, RHOPLEX® CL-204 Acrylic Emulsion is specifically engineered to minimize this microfoam entrapment by slowing the film-set process which occurs under extreme ambient conditions, while still maintaining acceptable early print resistance properties.