Products

Exolit® OP 1260 is a non-halogenated Flame Retardant for Polyester based on organic phosphinates. The product achieves its flame retardant effect through a combined gas phase and condensed phase mode of action. Exolit® OP 1260 is based on commercially available chemical substances registered in inventories worldwide.

AEROSIL® 150 is a hydrophilic fumed silica with a specific surface area of 150 m²/g

Exolit® AP 420 is an approx. 45 % clear to cloudy aqueous solution of a short chain ammonium polyphosphate.

EMERAL EMR D161 is an effect pigment and pigment used in coatings, specifically for metallic paints.

Superior Graphite 2922 is a purified flake product manufactured using Superior Graphite’s proprietary electro-thermal purification technology. This continuous high-temperature process exposes the flake graphite to extremely high temperatures so that impurities, including inorganic contaminants, are sublimed. Superior Graphite 2922 is the medium-coarse size grade of the 'Thermally Purified Flake' product line produced using Superior Graphite’s dedicated milling and screening technology. Main uses are increase in thermal and electrical conductivity, coefficient of friction reduction, and low gas diffusion property enhancement in high demanding applications.

NACOL 22-98 Alcohol are single fractions of linear, primary, oleochemical based fatty alcohols with even numbered carbon chain lengths ranging from C6 to C22.

VERSAL RED FGRD 01 is a pigment used in decorative paints, coatings and stains, industrial coatings, and offset lithographic printing. It is compatible with nitrocellulose and cures using radiation. This pigment is designed to enhance color in various coating and printing applications.

CEAMBLOOM CF 93-304 is a carrageenan based product, standardized to obtain a uniform performance. Carrageenan is a natural hydrocolloid extracted from red seaweed of the Rhodophyceae class SC.

CARPOL® MX-425 is a Mannich-based polyether polyol. The resulting product has a nominal functionality of approximately four and a targeted hydroxyl number of 425. The presence of amine in this polyol creates a material that is autocatalytic. Due to this, CARPOL® MX-425 is suitable for spray foam formulations in addition to any other application that demands a fast cure.

LOTRYL® 35BA320 is a random ethylene-butyl acrylate copolymer.

ZINC STEARATE RSN POWDER HYDENSE® is medium to low bulk density, very fine white powder.

Bluesil™ FLD 47 V100 000 (viscosities 100000) is dimethylpolysiloxane polymers with linear chains.

CARPOL® SP-477 is a sucrose-initiated polyether polyol. The high functionality of the initiator yields a resultant polyol with a nominal functionality of five and a typical hydroxyl value of 470. Due to this polyol’s functionality, its niche is rigid foam and its applications. Blending this polyol with other polyether polyols allows for foam systems with high to low degrees of crosslinking. In addition, CARPOL® SP-477 is a neutral material, which presents the formulator with complete catalytic control over a system.

PARALOID™ A-101 is a very hard methyl methacrylate polymer resin is recommended for clear coatings on vinyl, metal, and wood; gravure printing inks; plastisol primers; and barrier coatings for plastic. PARALOID A-101 has excellent adhesion to plastic; is fast drying; has excellent durability; and is highly resistant to water, grease, salt spray, and gasoline.