Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- CI Name
- CI Number
- Chemical Family
- Function
- Pigment
- Product Code
- MITM15890
- Single Ingredient
- Yes
- Synonyms
- C.I. Pigment Red 112, Pigment Red 112, C.I. PR 112, C.I. 12370, PR 112
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Coating End Applications
- Compatible Polymers & Resins
- Cure Method
- Ink & Toner End Applications
- Markets
- Applications
Properties
- Color (Properties)
- Physical Form
- Notes
- Fastness to Solvents: colouring of solvent after 24 h at 20 °C according to ISO grey scale is determined; degree 1 denotes the lowest fastness, degree 5 the highest one
- Fastness to Reagents: colouring of reagents after 24 h at 20 °C according to ISO grey scale is determined; degree 1 denotes the lowest fastness, degree 5 the highest one
- Light Fastness - Xenotest: determined by ČSN EN ISO 105-B02: 2000 (80 0147) and evaluated in 1/3 and 1/1 of standard depth and in full shade; determined according to blue scale, by it degree 1 denotes the lowest fastness, degree 8 the highest one
- Weathering Fastness - Xenotest: determined by ČSN EN ISO 105-B04: 1998 (80 0171) and evaluated in 1/3 and 1/1 of standard depth and in full shade;
- determined according to grey scale, by it degree 1 denotes the lowest fastness, degree 5 the highest one
- Overspray Fastness: assessment of bleeding into a white nitrocellulose combination lacquer for 60 min. at 70 °C against ISO grey scale; by it degree 1 denotes the lowest fastness, degree 5 the highest one
- Heat Resistance: the values quoted indicate up to what temperature the pigments do not significantly alter; these are guide values which can be influenced by the binder used and the period of exposure to high temperature
- Migration Fastness: assessment of bleeding into a white polyvinylchloride sheet for 24 h at 70 °C against ISO grey scale; by it degree 1 denotes the lowest fastness, degree 5 the highest one; no data means that the pigment is not recommended for dyeing of PVC
- Fastness to plasticizers: colouring of plasticizer (diethylhexylterephthalate) after 24 h at 20 °C acording to ISO grey scale is determined; degree 1 denotes the lowest fastness, degree 5 the highest one
Principal Information
- Group Principal Number
- S002261
- Principal
Other
- Color (SDS)
- Red
- Insoluble in (SDS)
- Water
- Odor (SDS)
- Odorless
- Other Hazards
- Dust/air mixture can be explosive
- USA/DOT UN Number
- Not Applicable
- Thermal Properties
Value Units Test Method / Conditions Thermal Stability 180.0 °C °C in coatings - Shelf Life & Stability
Value Units Test Method / Conditions Chemical Fastness (Acetone) 3.0 - Chemical Fastness (Butyl Acetate) 3.0 - Chemical Fastness (Ethanol) 3.0-4.0 - Chemical Fastness (Linseed Oil) 3.0 - Chemical Fastness (Water) 5.0 - Gray Scale Chemical Fastness (White Spirit) 4.0 - Chemical Fastness (Xylene) 2.0-3.0 - Light Fastness 7.0 - Shelf Life 48.0 mo mo Weathering Fastness 4.0 - EN ISO 105-B04: 1998 Weathering Fastness 3.0 - Overspray - Physical Properties
Value Units Test Method / Conditions Bulk Volume 6.9 L/kg L/kg Oil Absorption 57.0 ml/100 g ml/100 g DIN EN ISO 787-5 - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Lower Explosive Limit (SDS) 95.0 g/m³ g/m³ Ei= 4.5 kJ Specific Gravity (SDS) 1.6 - pH (SDS) 6.0-8.0 - at 20°C, 100 g/l water solution