Products

CUPRON CLASSIC HDPE MASTERBATCH 30% is a material with microbe and mildew resistance, preventing odor build-up. It functions as a biocide in plastics and elastomers.

CARPOL® GP-1500 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 1500 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-1500 may also be included as a component in other urethane products and formulations.

Cotrol™ AMB is an ammonium benzoate-based flash rust corrosion inhibitor. It is a cost-effective flash rust inhibitor that does not leave water-soluble components in the cured film thereby causing water sensitivity problems.

Additin® RC 9300 is a corrosion-resistant additive package with anti-wear, antioxidant, and corrosion inhibitor functions. It provides excellent demulsibility, filterability, oxidation and thermal stability, hydrolytic stability, and high load carrying capacity. Suitable for compressor fluids, compressor oils, and hydraulic fluids. Compatible with metal, non-ferrous metal, and steel.

Additin® RC 7120 is a single-ingredient antioxidant used in gear oils, hydraulic oils, metalworking fluids, and turbine & compressor fluids. It provides excellent oxidation stability, making it suitable for use in compressor oils, gear oils, hydraulic fluids, metalworking fluids, and turbine oils.

Additin® RC 2516 is a deactivated, medium active, light colored, low odor, high viscosity sulfur carrier with good solubility even in nonpolar base oils. Due to its excellent polarity and lubricity in combination with a controlled sulfur activity, it is particularly suited for manufacturing metalworking fluids for medium to heavy duty stamping, fine blanking and metal forming processes. The low copper corrosivity makes it also suitable for machining yellow metal alloys. It is also highly recommended for the formulation of EP greases, slideway oils and industrial gear oils.

Stabaxol® I Powder is an active antihydrolysis agent for polyester polyurethanes produced by hot casting like e. g. PET, PBT, TPE, PLA, TPU and millable Urethane rubber. Polymers with amide groups (PA) can be protected against hydrolysis with Stabaxol® I Powder, too. Stabaxol® I Powder is very suitable for extrusion of monofilaments. Due to its powder form it can be handled easier than Stabaxol® I or Stabaxol® I LF.

TAMOL® 819 is a dispersant used as a CASE ingredient in chemical mixtures and blends.

Additin® RC 4810 is an amine-free corrosion inhibitor used in metalworking fluids. It provides corrosion inhibition, excellent emulsifiability, lubrication, and wear protection. The product is suitable for use in anti-rust oils, dewatering fluids, metalworking fluids, and mold release oils. It also acts as an ashless additive.

AEROSIL® R 7200 Coating is a structure modified fumed silica after treated with methacrylsilane.

Protectosil® WS 340 PLUS ia a aqueous emulsion based on organofunctional silanes and siloxanes for the water repellent impregnation of mineral substrates while providing an excellent water beading effect.

CARPOL® GP-6305 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6300 Da. This triol is polymerized with propylene oxide and then capped with 5% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., however, CARPOL® GP-6305 may also be included as a component in other urethane products and formulations.

NIONIC™ 31R1 Surfactant is a reverse block copolymer surfactant with a chemical structure designed to provide reduced foaming and gelling tendencies compared to non-reverse block copolymer surfactants. NIONIC™ 31R1 Surfactant can be used to reduce the surface tension of liquids, including high viscosity liquids even at very low concentrations. The unique features are extremely low toxicity, defoaming activity, wetting, cleaning, emulsification, and chemical and thermal stability.

CUPRON SNOW WHITE PET MASTERBATCH 40% is a material with microbe and mildew resistance, preventing odor build-up. It functions as a biocide in plastics and elastomers.

CARPOL® GP-6015-60 is a glycerine-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6000. This triol is polymerized with propylene oxide and then capped with 15% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., as this polyol has low total unsaturation levels and an anti-oxidant package taylored for this type of market.