Products

Elevast™ D10 are specialty hydrocarbon fluids designed to enhance the performance and processability of a broad range of polymer systems and applications. Elevast efficiently lowers Tg of polyolefins with carefully designed liquid polymer, with minimal change in crystalline properties and without requiring exquisite morphology control.

CEAMPECTIN ESS 4410 is based on a high ester pectin, extracted from selected high quality citrus peel and standardized to obtain an uniform performance SC.

Synesstic™ 5 represent a unique class of API Group V category fluids. Synesstic™ 5 offers improved hydrolytic, thermal and oxidative stability versus other Group V fluids. Synesstic™ 5 is particularly suited for use as a blendstocks in synthetic lubricant applications that require high stability under extreme operating conditions.

Elevast™ D50 are specialty hydrocarbon fluids designed to enhance the performance and processability of a broad range of polymer systems and applications. Elevast efficiently lowers Tg of polyolefins with carefully designed liquid polymer, with minimal change in crystalline properties and without requiring exquisite morphology control.

CYCAT® 4040 is a catalyst that improves cure time in CASE ingredients. It functions as a catalyst in various applications.

CAPROL® ET is a mixed polyglycerol ester prepared from mixed vegetable fatty acids and a glycerol polymer containing an average of six glycerol units and is typically used as a cloud (crystallization) inhibitor in vegetable and salad oils.

CEAMFIBRE 7200 SF is a plant-based dietary fiber that functions as a fiber source and gelling agent. It is suitable for use in creams, juices, ketchup, mayonnaise, meat injection, sauces, and yogurt drinks. It offers emulsion stabilization, high viscosity, good gelling properties, high oil absorption, improved freeze/thaw stability, and enhanced water binding.

LOTADER® 8200 is a random ethylene-ethyl acrylate-maleic anhydride terpolymer. Due to its properties, reactivity, fluidity and compatibility with tackifying resins and waxes, It is suitable as additive for hot melt adhesive formulations and as coupling agent in mineral filled compounds.

CEAMSEA PT 10200 is a dietary fibre ingredient produced from red seaweeds from Rhodophyceae class.

CAPTEX® 355 C EP/NF is manufactured by the esterification of glycerin and fatty acids, mainly caprylic (≈55%) and capric. The glycerin and fatty acids are from coconut sources only. Captex® 355 C EP/NF contains not less than 95% of saturated fatty acids with 8 and 10 carbon atoms. It is miscible with most organic solvents including 96% ethanol.

MARLOX® RT 64 is one of the many low foaming EO/PO non-ionic surfactants produced by Sasol Chemicals in Germany. These alcohol alkoxylates are based on Sasol’s wide range of linear and semi linear fatty alcohols. They are produced by alkoxylation of the fatty alcohols to varying degrees using ethylene oxide and propylene oxide. MARLOX RT 64 is a turbid liquid at room temperature and essentially 100% active.

Stabaxol® I is an active antihydrolysis agent for polyester polyurethanes produced by hot casting as well as for adhesives based on polyester polyurethane.

PARALOID™ A-21LV 30% Resin is a very hard methyl methacrylate polymer with enhanced adhesion properties. It is supplied as a 30% solution in a toluene/MEK/butanol solvent system. The polymer is also available in solid grade form. PARALOID™ A-21LV 30% Resin is similar to PARALOID™ A-21LV 30% Resin in characteristics and uses but because of its solvent system, PARALOID™ A-21LV 30% Resin possesses better compatibility with cellulosics, such as nitrocellulose and cellulose acetate butyrate. PARALOID™ A-21LV 30% Resin also will allow a higher solids content at spray viscosity.

RHOPLEX® HG-98C is an acrylic emulsion polymer designed specifically for low solvent content, aqueous gloss enamels with excellent appearance and resistance properties. RHOPLEX® HG-98C uses ambient temperature crosslinking technology to offer improved performance versus conventional polymers. It has excellent hardness development and durability for high traffic interior applications.

RHOPLEX® WL-51 is ideal for high-performance waterborne finishes for coating plastic substrates, such as those used for business machines and office equipment. RHOPLEX® WL-51 is recommended for use on the following plastics: acrylonitrile/butadiene/styrene, polycarbonate, polyphenylene oxide, polyvinyl chloride, acrylic, polystyrene, high-impact polystyrene, polypropylene, and pre-treated thermoplastic polyolefin. RHOPLEX® WL-51 delivers an outstanding combination of application, durability, and appearance benefits that make it an excellent choice for demanding business and office applications.