Products

HP9891-TOFA Short Oil Alkyd is a short oil, chain-stopped alkyd resin based on Tall Oil Fatty Acid for air-dry spray paints and baking enamels. It exhibits good overbake resistance

HP1717 - Polystar Soya Long Oil Alkyd is a long oil alkyd made with soya oil in low odour mineral spirits. It has been formulated for use in wood and metal coatings and architectural enamels. This product exhibits low yellowing, good gloss, and good overall appearance.

HP9825-TOFA Short Oil Alkyd is a short oil, chain stopped alkyd resin based on tall oil fatty acid. It is formulated for air-dry enamels, spray paints, and baking enamels. It exhibits good overbake resistance

EBECRYL® 170 is an acidic acrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal.

EBECRYL® 8702 is an aliphatic urethane hexaacrylate that offers a multitude of performance properties allowing the formulator the flexibility to meet requirements. Films using EBECRYL® 8702 cured by ultraviolet light (UV) or electron beam (EB) exhibit a combination of hardness, abrasion and impact resistance coupled with good exterior durability.

UCECOAT® 7230 is a UV/EB energy curable polyurethane dispersion with low tack before cure and after water evaporation. It has been developed for high hardness top coats on plastics, wood and other substrates, including both transparent and pigmented. UCECOAT® 7230 demonstrates high reactivity, good compatibility and good colloidal stability. The cured coating exhibits high gloss and very high hardness, abrasion resistance, chemical resistance, as well as good adhesion on plastics.

PARALOID™ B-72 100% Resin has low reactivity with sensitive phosphorescent and luminescent pigments to produce stable, durable, non-yellowing coatings. It is compatible with vinyls, cellulosics, chlorinated rubbers, and silicones. It is well suited for white and metallic aerosols, clear coatings for wood, nitrocellulose modified coatings for general product finishing, pigment dispersion (fluorescent), flexographic printing inks, and gravure plastic coatings.

EBECRYL® 284 is an aliphatic urethane diacrylate diluted 12% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). Films of EBECRYL® 284 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and flexibility, and are resistant to yellowing.

D.E.R.® 6225 is a modified, low molecular weight, solid reaction product of epichlorohydrin and bisphenol A. D.E.R. 6225 Resin is a modified, low molecular weight, solid epoxy resin which has been developed mainly for use in powder coatings. It has been designed for applications where excellent flow out and high gloss are required such as automotive, appliance or general metal decorative coatings. D.E.R.® 6225 is also suitable for use in thin film applications.

MAINCOTE™ 4950 Resin is an aqueous acrylic emulsion polymer that facilitates the formulation of coatings to less than or equal to 50 g/L VOC for use in light to medium duty maintenance and protective coatings applications and general industrial metal finishing applications. It offers excellent exterior durability and corrosion resistance, and ease of formulation with excellent paint stability. MAINCOTE 4950 Resin offers improved corrosion resistance versus current direct-to-metal (DTM) finish coats formulated below 100 g/L. It also offers good architectural gloss and trim paint properties. Low coalescent demand allows compliance with stringent VOC regulations.

PARALOID™ A-21 30% Resin is a very hard methyl methacrylate type polymer with enhanced adhesion properties. It is provided as a 30% solution in a toluene/butanol system. The polymer is also available in a solid grade form. Lacquers formulated with PARALOID™ A-21 30% Resin possess excellent intercoat adhesion, hardness, and outdoor durability. PARALOID™ A-21 30% Resin will air-dry rapidly to give clear, colorless films that have excellent resistance to yellowing.

EBECRYL® 6603 is an aromatic urethane acrylate diluted 20% by weight with the reactive diluent isobornyl acrylate (IBOA). Films of EBECRYL® 6603 cured by ultraviolet light (UV) or an electron beam (EB) feature good toughness, flexibility and abrasion resistance. EBECRYL® 6603 is useful as a modifier for harder resins such as epoxy acrylates.

ORGASOL® 2002 ES4 NAT 3 is a spheroldal powder of polyamide 12, with 4 as average diameter and a narrow particle size distribution. An extremely high level of quality is achieved thanks to our rigorous control of particle size distribution, providing xcellent coneletency in parformancs.

EBECRYL® 270 is an aliphatic urethane diacrylate. Films of EBECRYL 270 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, adhesion, abrasion resistance, exterior durability, and are resistant to yellowing.

ORGASOL® 2002 D NAT 1 is a spheroïdal powder of polyamide 12, with 20 um as average diameter and a narrow particle size distribution. An extremely high level of quality is achieved thanks to our rigorous control of particle size distribution, providing excellent consistency in performance.