Products

CA/ZN-STEARATE 5050 is a low bulk density, fine white powder.

PD-28 is white mineral oil, a mineral oil used in fluids and lubricants.

RHOPLEX® AC-464 is a binder and resin used in waterborne paint applications, functioning as a binder.

MARLOX® FK 64 is a fatty alcohol polyethylene glycol polypropylene glycol ether

EBECRYL® 7100 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7100 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Unlike conventional tertiary amines such as N-methyldiethanolamine, EBECRYL® 7100 reacts to become part of the UV cured polymer, resulting in lower residual odor and improved moisture resistance. EBECRYL® 7100 also promotes adhesion to plastic substrates and lowers viscosity when used as a primary component in UV adhesives and coatings.

EBECRYL® 8409 is a low viscosity aliphatic urethane diacrylate. Films of EBECRYL® 8409 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and excellent exterior durability. Low viscosity coatings or enhanced performance via increased oligomer content are possible with EBECRYL® 8409. Note that EBECRYL® 8409 typically develops a semi-crystalline aspect upon storage.

MARLOWET® 4564 is alcohol polyalkylene glycol ether acetic acid

CYMEL® 659E is a benzoguanamine-based chemical used in crosslinking applications.

TRIGLYCIDYL ISOCYANURATE JF-77B is an isocyanurate based crystalline polyepoxide compound, its molecular weight is 297(CAS Number:2451-62-9), it owns good heat resistance,weather resistance,adhesive and high temperature performance.

RHOPLEX® E-2961 is a polyacrylate based polymer that contains carboxylic acid groups. This rheology modifier is a pre neutralized alkali-swellable emulsion which requires no pH adjustment. This RM offers a good combination of thickening efficiency and water holding. It is excellent for heavy paper and paperboard applications where heavy coat weights are common.

DzBh Baling® SEBS YH-604T is a radial hydrogenated styrene/butadiene block copolymer.

ACRYSOL™ DR-110 Rheology Modifier is effective at building viscosity in a wide range of water-borne coatings formulations, from flat to semigloss. It offers application and feel properties to coatings that is very similar to those of hydroxyethylcellulose thickeners, particularly the hydrophobically modified type. Thus, it can provide a very cost-effective alternative to these cellulosic thickeners.

UCECOAT® 6560 is an aliphatic urethane acrylate solution in water, containing approx. 50% acrylated products. The UCECOAT® 6560 is organo-tin free and highly recommended as primer for wood applications. Films containing UCECOAT® 6560 and cured by ultraviolet light (UV) or electron beam (EB) exhibit a nice optical aspect on different woods. Stability problems can occur if more water is added. Therefore, we recommend to use the EBECRYL® 11 produced by allnex.

Bermocoll® Prime 1000 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance. and superior color stability. It improves the consistency, the stability, and the water retention of water based paints.