Products

MAINCOTE™ IC-1002 is a hydrophobic acrylic-styrene copolymer with excellent flexibility and adhesion to metal substrates. This versatile binder can be combined with low thermal conductivity fillers to form waterborne thermal insulation coatings with high pigment volume concentrations (PVC), high volume solids and low VOC levels (< 25 g/L). MAINCOTE™ IC-1002 Emulsion offers uniform cure in high build insulation coatings.

ZHENGDA® ZD-1400 Polyether amine(also called Amine-terminated Polyether) is characterized by repeating oxypropylene units in the backbone. As shown by the representative structure, ZHENGDA® ZD-1400 Amine-terminated Polyether is a difunctional, primary amine with average molecular weight of about 4000. The primary amine groups are located on secondary carbon atoms at the end of the aliphatic polyether chains.

CYMEL® 1125 resin is a highly methylated/ethylated, carboxyl-modified benzoguanamine crosslinker supplied in 2-butoxy ethanol. It is especially designed for electro-deposition primer formulations requiring excellent corrosion and detergent resistance. The structure of CYMEL® 1125 resin offers superior adhesion to metal substrates. CYMEL® 1125 resin can be used in a wide range of general purpose industrial finishes. However, because CYMEL® 1125 resin contains chelating groups which can form colored compounds with heavy metal ions such as iron and zinc, it is recommended for use in only dark single coat applications or primers, and not in pastel colors. Benzoguanamine resins have poor resistance to UV light, hence CYMEL® 1125 is not suitable for exterior applications

Dry Filtered Neutral Oil is a refined grade of castor oil having a very low moisture level and a very low acid value making this product ideal for applications where a low acid value and low moisture content is required.

CRAYVALLAC® LA-150 is a new pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to solvent based systems.CRAYVALLAC® LA-150 is a post-addition rheology modifier composed of a modified urea dissolved in DMSO. When added to the final system, the DMSO is diluted and the modified urea crystallizes out as very fine fibres which build into a three-dimensional interacting network. It is this network that gives rise to the system’s shear thinning rheology and time dependent viscosity recovery. The result is excellent control of sedimentation combined with ease of application. Immediately following application, where low shear conditions again predominate, the system’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependency is known as thixotropy and enables the final system to attain very good levelling.

EBECRYL® 605/20 is the bisphenol A epoxy diacrylate, EBECRYL 600, diluted 20% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 605/20 exhibits light color and fast cure response. Films of EBECRYL® 605/20 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and the superior chemical resistance typical of an epoxy resin.

ACRYSOL™ RM-2020 is a non-ionic urethane rheology modifier, providing high shear viscosity. It is specifically designed for applications where a low odour or low VOC is required. It can be used either alone or in combination with thickeners effective in the low shear range to reach the desired rheological profile. ACRYSOL™ RM-2020 Rheology Modifier allows formulations with a Newtonian rheology profile combined with excellent water and alkali resistance.

ALNOVOL® PN 320/PAST is a novolac phenolic resin with a chemical composition involving substances like phthalic anhydride and formaldehyde. It is designed for use in various coatings, such as enamels, lacquers, and petrol-resistant coatings. This product is compatible with natural rubbers (NR) and styrene butadiene rubber (SBR).

RHOPLEX® TP-257 is a high-solids binder for waterborne acrylic traffic paints, which offers a good cost/performance balance. Quick-drying striping paints formulated with RHOPLEX® TP-2577 resist the rigorous environment encountered on highways and related surfaces such as airfields and parking lots.

EBECRYL® 294/25 is an aliphatic urethane triacrylate diluted 25% by weight with the reactive diluent 1,6-hexanediol-diacrylate (HDDA). Films of EBECRYL® 294/25 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion and stain resistance, good exterior durability, toughness, and are resistant to yellowing.

EBECRYL® 4738 is a weather-stable aliphatic urethane acrylate having a relatively low viscosity due to the allophanate structure. Formulations based on EBECRYL® 4738 exhibit high reactivity and result in hard coatings.

ACRYSOL™ TT-615 is an alkali swellable acrylic polymer emulsion used as either a primary or ancillary thickener in coatings. This product exhibits viscosity build comparable to high molecular weight HEC thickeners at low shear levels. Viscosity is developed by neutralization to a pH of 7 to 10. ACRYSOL™ TT-615 demonstrates greater roller spatter resistance than the cellulostics, but with a more pseudoplastic rheology profile. The liquid physical form of ACRYSOL™ TT-615 facilitates its incorporation into grinds and letdowns.

AVANSE™ MV-100 represents the latest technology in waterborne acrylic polymers for high performance and low VOC industrial maintenance coatings. It provides formulators with a single resin which can be formulated into corrosion-resistant primers, highly durable topcoats, and high gloss direct-to-metal (DTM) finish coats. The novel technology behind the AVANSE™ Resins product line leads to new standards in film gloss, durability, corrosion control, chemical and solvent resistance, and adhesion. One aspect of this new technology is the formation of latex-pigment composite particles, which gives more homogeneous pigment distribution and results in enhanced corrosion resistance. Also, combining a novel polymer composition and the ability to self-crosslink after film formation, AVANSE™ MV-100 Resin offers the ability to formulate high performance coatings with volatile organic content (VOC) at or below 100 g/L. The favorable colloidal stability of AVANSE™ MV-100 Resin accommodates a broad range of formulation types, providing the formulator with a versatile binder for a variety of applications. Formulation robustness, along with 50-51% weight solids, allows the formulator to produce coatings with volume solids above conventional waterborne binders.

Tetrahydrofuran is a precursor and solvent used in chemical manufacturing, industrial and assembly adhesives, industrial coatings, and resin manufacturing.

Toyal 7150N is a medium-coarse particle sized non-leafing aluminum pigment, with irregular flake geometry. It is a mixture of mineral spirits and high aromatic solvents.