Products

Licocene® PP 6102 fine grain is a hot melt additive used in hot melt adhesives. It functions as a processing aid, external lubricant, dispersant, and carrier. It is also used in industrial additives and plastics & elastomers for dispersing pigments, and in extruded items.

Hostavin® 3055 liq is a low-molecular radical scavenger of the type hindered amine light stabilizer (HALS) for solventless and solventborne paints. On principle, it is also suitable in waterbome coatings. Hostavin® 3055 liq is characterized by its excellent solubility, broad compatibility, low volatility and good stabilization efficiency. It can either be added to the ready-to-use paint or incorporated during the paint production. However, as all UV stabilizers, it ought not to be added to the mill-base. Depending on the requested stabilization effect, the addition rate should be in the range of 1.0 to 3.0 %. All concentrations relate to active UV stabilizer on solid resin. Pre-trials, covering various concentrations, are highly recommended. As a non-substituted HALS, Hostavin 3055 liquid is slightly basic and because of this can have an influence on the crosslinking of binders. In such a case, the altemative use of Hostavin 3058 liquid is recommended. Since HALS is highly recommended for all outdoor durable coatings, the need for an additional UV absorber strictly depends on the UV transmittance of the final coating. Inorganically pigmented coatings with good hiding power do usually not require an additional UV absorber, clear coats certainly do.

Licowax® OP powder is a partly saponified ester wax.

Licocene® PP 2602 granules are ethylene/propylene copolymer waxes used in hot melt adhesives.

Ceridust® 5551 is a micronized, partly saponified ester of montanic acids.

Hostavin® VSU powder is an Oxalanilide UV absorber, a low volatile polar substance with good heat stability. It is resistant to discoloration with metal ions, e.g. from polymerization catalyst residues, fillers or from contact surfaces. Hostavin® VSU powder absorbs the UV light especially in the UV-B range, and is therefore a stabilizer of choice for combinations with optical brighteners and for UV curing systems.

Exolit® OP 560 is a flame retardant that can be used for flexible polyurethane foams. It is a medium viscosity liquid and it is based on a non-halogenated phosphorus polyol. The product is a reactive flame retardant which can be chemically reacted into the polymeric matrix. Therefore, very low fogging values can be achieved which meet the most stringent emission standards for PU flexible foams in the automotive industry.

Exolit® AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable.

Exolit® OP 930 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents lik cetone, dichloromethane, MEK, toluene. Exolit® OP 930 can easily be dispersed in solvents like acetone or MEK.

Exolit® OP 1240 is a flame retardant based on an organic aluminum phosphinate which is a thermally stable white solid without any hazard classification or labeling. It can be easily compounded into polyesters and subsequently processed again to manufacture flame retarded parts used in consumer or industrial products.

Synesstic™ 5 represent a unique class of API Group V category fluids. Synesstic™ 5 offers improved hydrolytic, thermal and oxidative stability versus other Group V fluids. Synesstic™ 5 is particularly suited for use as a blendstocks in synthetic lubricant applications that require high stability under extreme operating conditions.

CYMEL® 1133 Resin is a highly methylated, n-butylated melamine crosslinker with a high degree of alkylation. It has a higher butoxymethyl content and higher monomer content compared to CYMEL® 1130 resin. Its hydrophobic nature combined with very good film appearance properties makes CYMEL® 1133 resin suitable for automotive topcoat applications and general metal finishes requiring improved durability and resistance properties.

Bayferrox® 130 M is a single-ingredient inorganic pigment, specifically Pigment Red 101, made from iron(III) oxide. It is used in various applications requiring stable, high-performance coloring.

Bayferrox® 140 M is a single-ingredient inorganic pigment, specifically Pigment Red 101, made from iron(III) oxide. It is utilized for applications that require stable and reliable coloring properties.