Products

ACRYSOL™ RM-12WE Rheology Modifier is a nonionic rheology modifier designed to offer high low-shear viscosity with an extremely shear thinning rheology and excellent thickening efficiency. It offers a rheology profile similar to ACRYSOL™ RM-12WE Rheology Modifier but is prepared without intentionally adding tin compounds to the production process.

Additin® RC 8000 is a sulfur linked polymer, inactive Extreme Pressure Additive, light-colored and with low odor.

RHOPLEX® MV-23LO is an aqueous, all-acrylic binder designed for interior and exterior wood primers and stain-blocking sealers. It is a versatile vehicle that can be used in both the formulation of primers that upgrade difficult substrates into sound repaint surfaces, and stain blocking sealers that minimize the "bleed through" of wood tannins and common household stains.

ACRYSOL™ RM-995 offers both enhanced viscosity stability to colorant addition and improved sag resistance to broad-wall paints. ACRYSOL™ RM-995 is a solvent-free (Manufactured without added solvent), hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier based on proprietary technology. This KU-builder rheology modifier offers the properties that HEUR technology is known for, e.g., excellent flow, gloss development and applicability both interior and exterior, with improved performance in viscosity stability upon tinting and excellent sag resistance.

Additin® RC 9505 additive package for EP greases.

Baerostab® B-2381 is a liquid Calcium/Zinc Stabilizer.

AddWorks® ATR 146 is Clariant’s new low dosage, sulfur-free stabilizer solution for filled TPO compounds used in automotive interior. It offers outstanding light protection, exceptional heat stability, reduced VOC/odor emissions. AddWorks ATR 146 is used for typical TPO-based car interior parts such as dashboards, instrument panels and door panels. The solution fulfils current OEM requirements and sets the benchmark for the next generation of automotive interiors.

CYMEL® UI-20-E Resin is a partially iso-butylated urea crosslinker designed for use in acid curing wood coatings with high film build requirements. Being supplied in ethanol, films dry very quickly resulting in coatings with excellent early block resistance.

ACRYSOL™ RM-2020 is a non-ionic urethane rheology modifier, providing high shear viscosity. It is specifically designed for applications where a low odour or low VOC is required. It can be used either alone or in combination with thickeners effective in the low shear range to reach the desired rheological profile. ACRYSOL™ RM-2020 Rheology Modifier allows formulations with a Newtonian rheology profile combined with excellent water and alkali resistance.

Additin® RC 3662 is a tricresyl phosphate for reduction of friction and wear in applications where high loads cause boundary lubrication conditions. Used in high performance fluids including mineral oil and synthetic base fluids and more difficult base fluids such as polyalphaolefins. Triaryl phosphates of this type are widely known as effective ashless antiwear and mild extreme pressure additives for lubricants and functional fluids.

Additin® M 49.002 is a anticorrosion, Lubricity Additive and Film Former.

ACRYSOL™ RM-2020 NPR is a nonionic, solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that offers excellent flow and leveling, film formation, gloss development and high shear (film build) viscosity in interior and exterior latex paints.

ACRYSOL™ RM-3030 Rheology Modifier is a solvent-free1, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier based on proprietary technology. This ICI-building associative thickener offers formulators efficient ICI contribution with minimal mid-shear rheology response. ACRYSOL™ RM-3030 Rheology Modifier has demonstrated improved syneresis resistance in broad formulation latitude. ACRYSOL™ RM-3030 Rheology Modifier should be added under good mixing conditions to ensure complete incorporation into the formulation.