Products

Exolit® RP 614 presscake is a fine brown-red powder with a water content of 10-25%, based on a highly stabilized, microencapsulated grade of red phosphorus. This allows a safe and simple handling of the red phosphorus in a presscake form, and avoids the hazards associated when working with dry red phosphorus powders. Exolit RP 614 Presscake is noted for its high oxidation and thermal stability. It is insoluble in water and organic solvents. Due to the combination of stabilization and microencapsulation, the material is mostly inert against atmospheric influences.

Exolit® RP 607 is a flame retardant based on red phosphorus. Due to a unique stabilization it is noted for its high oxidation and thermal stability. Exolit RP 607 is a fine brownish- red powder, insoluble in water and organic solvents. Due to the combination of stabilization and microencapsulation, the material is mostly inert against atmospheric influences.

Silcolapse® 426R U1 is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems.

CIMBAR UF is used as a filler and pigment in paints and coatings.

CLEAR-BLOC® 80 talcs are produced from high purity ore provides high brightness, clarity, low iron content, and low surface area for primary use as an anti-block additive in LDPE and LLDPE film applications where superior blocking, greater polymer stability and improved optical properties are required. CLEAR-BLOC® 80 and 100 talcs are platy, hydrophobic, non-abrasive, chemically inert and is suitable for food contact applications.

Silcolapse® 426R is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems.

GENIOPLAST® FLUID 110 US is a clear, odorless and colorless liquid.

Bluesil™ EMUL 1635 is a general purpose, non-ionic, aqueous silicone emulsion of 350 cSt PDMS fluid.

FlexTalc® 610D is an ultrafine talc product line specifically engineered for use in high performance TPO applications. It is made by a proprietary process that results in talc products which have very high aspect ratios, are easily dispersed, provide unmatched heat aging and offer exceptional compounded color. It is avalable in powder and compacted (D) forms, lightly compacted (LD) and sized/compacted (DS)

CIMBAR 325 is used as a filler and pigment in adhesives and sealants, carpet, ceramics and refractory, metal manufacturing and finishing, and paints and coatings. It is also applied in copper smelting, frictionizing, and sound deadening processes.

CLEAR-BLOC® 100 C is surface coated talc thet are produced from high purity ore to provide high brightness, clarity, low iron content, for use as an anti-block additive in LDPE and LLDPE film applications where blocking, greater polymer stability with improved optical properties are required. CLEAR-BLOC® 100 C is platy, hydrophobic, non-abrasive, and chemically inert and are approved for food contact applications. CLEAR-BLOC® 100 C is produced with a priority process grinding system to improve consistency and uniformity of the material. CLEAR-BLOC® 100 C is available in powder form and in a CS design which increases the bulk density from 12 lbs to 60+ lbd for feed systems requiring a quick mix and complete dispersion of the sized material while increasing the throughput of your line.

CIMTALC® 3D is used in ornamentals, pest control, and turf management. It functions as a flux and low shrink additive in plastics and elastomers.

CIMTALC® 3 is produced from high purity ore, which provide low iron content, low surface area and excellent color in dry form as well as when incorporated with resins. CIMTALC® 3 is primarily used in performance polypropylene, polyethylene and TPO where improved tensile strength, flexural modulus, heat distortion temperature, increased stiffness, reduced shrinkage, and lower compounding costs are required. CIMTALC® 3 is platy, hydrophobic, non-abrasive and chemically inert. This is an ideal group of talc products for imparting durability in coatings applications as well.

CLEAR-BLOC® 80C is a surface coated talc that are produced from high purity ore to provide high brightness, clarity, low iron content, for use as an anti-block additive in LDPE and LLDPE film applications where blocking, greater polymer stability with improved optical properties are required. CLEAR-BLOC® 80 and 100 talcs are platy, hydrophobic, non-abrasive, and chemically inert and are approved for food contact applications. CLEAR-BLOC talcs are produced with a priority process grinding system to improve consistency and uniformity of the material.

CIMBAR XF functions as a filler and pigment in plastics and elastomers.