Products

APODIL 1018 is a low viscosity, aliphatic diepoxide reactive diluent based on Neopentyl glycol. It is compatible with all types of epoxy resins in any proportion.

EBECRYL® 8413 is designed as the pigment grind oligomer for UV cured thermoformable ink applications and is designed for use in conjunction with the letdown oligomer, EBECRYL® 1300. EBECRYL® 8413 exhibits good milling properties and has very high elongation (550%). When used together with EBECRYL® 1300, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.

PIGMENT YELLOW E4GN /OF is an organic pigment of the azo-nickel-complex chemical family, used as a pigment in case ingredient applications.

EBECRYL® 130 is a cyclic aliphatic diacrylate useful as a reactive diluent in UV (ultraviolet) or EB (electron beam) curable coatings and inks. EBECRYL® 130 can impart a combination of hardness, toughness, and resiliency coupled with improved adhesion properties on various substrates. EBECRYL® 130 can also significantly increase the Tg of cured polymers. EBECRYL® 130 is particularly useful for scratch resistant coatings an plastics and as a pigment grinding vehicle for UV inkjet inks.

EBECRYL® 8800 is an aliphatic urethane acrylate diluted with 10% by weight of the reactive diluent ethoxyethoxyethyl acrylate (EOEOEA). Films of EBECRYL® 8800 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion resistance, toughness, rapid cure response and resistance to yellowing.

AP 1018 is a low viscosity reactive, solvent free phenalkamine hardener for epoxy resins based lacquers and coatings.

Bermocoll® EHM EXTRA is an associative non-ionic, water-soluble cellulose ether that improves the rheological properties of water-based paints.

PARALOID™ B-1225DMC functions as a binder, resin, and dispersant in case ingredient applications.

RHOPLEX® CL-105 is designed for use in factory-applied, waterborne, acrylic wood finishes that require warmth, clarity, grain character and sandability. Sealers based on this emulsion have excellent sanding characteristics without the addition of stearates or other sanding aids. Formulations based on RHOPLEX® CL-105 are clear from the moment they are applied due to their excellent wet film clarity. These formulations also dry very rapidly. Clear lacquers based on RHOPLEX® CL-105 are formulated to have very low VOC and HAPS content, important advantages over solvent borne lacquers.

Castorwax® is a wax like compound obtained by the controlled hydrogenation of pure castor oil. The principle constituent is glycerol tri-(12-hydroxystearate), also known as opalwax. Castorwax® is a hard, brittle, high melting point wax that is insoluble in most organic solvents but is highly compatible with most resins and waxes.

AP 5986 is low viscosity, benzyl alcohol and nonyl phenol free modified cycloaliphatic amine hardener for epoxy resin based coatings.

AP 1520 is a low viscosity, solvent free, Polyaspartic acid.

EBECRYL® 8501 is an aliphatic urethane acrylate designed for use in automotive refinish and general metal applications. Films of EBECRYL® 8501 exhibit a unique blend of flexibility and toughness coupled with good corrosion resistance. EBECRYL® 8501 contains isobornyl acrylate (IBOA)(1) as a reactive diluent.

ACRYLTAC® SP-409 is a high solids, multi-functional acrylic emulsion polymer.

AP 1072 LT is a low viscosity, reactive Phenalkamine adduct hardener solution for epoxy resins based lacquers and coatings.