Products

D.E.R.® 916 Epoxy Resin is a modified, semi-solid, epoxy novolac resin emulsified in water.

Exolit® AP 435 is a fine particle ammonium polyphosphate (phase II) optimized for low viscosity in aqueous suspension and intumescent coatings. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable.

D.E.R.® 3212 liquid epoxy resin is a reactive product of epichlorohydrin and bisphenol a modified with and aromatic mono-functional reactive diluent.

CRYSTIC® VE671 is an epoxy Bisphenol A based standard vinyl ester resin. Crystic® VE671 has outstanding chemical resistance to a wide range of substances, (acids, alkalies, oxidising agents) at room and elevated temperatures.

AEROSIL® OX 50 is the fumed oxide of our portfolio with the smallest specific surface area. High chemical purity, distinct low thickening and agglomeration properties are typical characteristics.

D.E.N.® 438-MAK80 is a solution of a semi-solid reaction product of epichlorohydrin and phenol-formaldehyde novolac in methyl n-amyl ketone.

D.E.R.® 3401 is a low viscosity rapidly reacting bisphenol a/f epoxy resin designed for fast-curing coatings, adhesives, and mortars.

D.E.R.® 727 Epoxy Diluent is a p-tert.-butyl-phenyl glycidyl ether based reactive diluent.

D.E.H.® 39 Epoxy Curing Agent is a liquid cycloaliphatic polyamine curing agent. D.E.H.® 39 Resin is a low viscosity aliphatic polyamine based on aminoethylpiperazine (AEP). D.E.H.® 39 Curing Agent provides a short pot-life and cures in minutes with liquid epoxy resins. Similar in application to D.E.H. 20, 24, 26 and 29 Epoxy Curing Agents, D.E.H.® 39 Curing Agent is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, civil engineering applications and as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 39 Curing Agent is used for casting, potting and encapsulation. D.E.H.® 39 Curing Agent is often used for epoxy composite materials.

D.E.R.® 352 liquid epoxy resin is a reaction product of epichlorohydrin with bisphenol a and Bisphenol F.

Exolit® AP 422 A is a fine-particle ammonium polyphosphate (phase II) with less than 0.1% melamine. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic, non-flammable, and classified as SVHC-free under current regulations.

D.E.N.® 428 is a liquid reaction product of epichlorohydrin and phenol-formaldehyde novolac.

Clearstrength® XT151 is a toughness modifier and toughener that offers easier processing, good adhesion, excellent elongation, low temperature toughness, and low viscosity. It is used as a toughener in CASE ingredients, composite materials, and plastics and elastomers.

3M™ Glass Bubbles XLD3000 are high-strength additives for polymers made from a water-resistant and chemically stable soda-lime-borosilicate glass. These hollow glass bubbles can be compounded with a variety of polymers to reduce the overall thermal conductivity of the composite. These composites can be coated or incorporated into deep sea oil pipelines to improve the flow assurance properties of the system.

Dynasylan® GLYEO is a bifunctional organosilane possessing a reactive organic epoxide and a hydrolyzable inorganic triethoxysilyl group. The dual nature of its reactivity allows Dynasylan® GLYEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent and/or surface modifier. Dynasylan® GLYEO is a colorless low­viscosity liquid with a slight terpentine­like odor. It is soluble in alcohols, ketones and aliphatic and aromatic hydrocarbons.