Flooring & Surfaces

TEGO® Glide B 1484 combines flow promotion with deaerating properties in solvent-free and solvent-borne coatings. It supports orientation of matting agents.

TEGO® Foamex 815 N is an effective defoamer emulsion based on polyether siloxane technology. Good balance of effectiveness and compatibility.

TEGO® Foamex 1488 is a very effective defoamer emulsion based on polyether siloxane technology. Universally used in waterborne formulations.

TEGO® Foamex 840 is an effective defoamer concentrate based on polyether siloxane technology. Contains no fumed silica. Provides good long-term effectiveness and additional deaeration effect.

TEGO® Foamex 883 is a highly effective deaerator concentrate based on polyether siloxane technology. Good long-term effectiviness against foam.

RHOPLEX® EP-6060 is recommended for factory-applied interior wood coatings requiring early hardness, block resistance, and sandability. It can be used in clear formulations as a sealer and topcoat or in lightly pigmented (PVC 20%) coatings. The wet and dry clarity of films based on RHOPLEX® EP-6060 is good, especially over light wood.

RHOPLEX® AC-261LF is an all-acrylic emulsion polymer for latex floor paints. Its adhesion and abrasion resistance have been designed for this application. It is also suitable for quality exterior semi-gloss trim paints.

Polyfill 403SM is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

EBECRYL® 885 is a trifunctional polyester acrylate oligomer. Films of EBECRYL® 885 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. EBECRYL® 885 is recommended for parquet floor coating, wood furniture coating applications and flexible coatings for metal.

EBECRYL® 893 is a modified polyester acrylate specifically developed for UV curable field applied concrete and vinyl composition tile (VCT) floor coatings. EBECRYL 893 provides resistance to yellowing upon cure and over its lifetime. The low viscosity of EBECRYL 893 also provides latitude to achieve low viscosity formulations, which are required for field applied applications. Concrete and VCT coatings based on EBECRYL 893 provide a good balance of properties such as cure speed, adhesion, hardness, and scratch resistance. Good chemical and solvent resistance and high gloss are also obtained with concrete and VCT coatings based on EBECRYL 893.

MAINCOTE™ AE-58 is an aqueous acrylic emulsion copolymer which can be crosslinked with waterborne dispersions of epoxy resin in two-component acrylic/epoxy coatings. The resulting acrylic/epoxy coatings have properties such as low VOC, long pot life, and outstanding hardness, UV durability and solvent/chemical resistance. The high performance coatings can be used in a variety of interior and exterior applications for metal and concrete surfaces, such as institutional wall coatings and industrial metal primers, topcoats and direct-to-metal (DTM) coatings.

Polyfill 301SM is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

Polyfill 204 is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

EBECRYL® 294/25 is an aliphatic urethane triacrylate diluted 25% by weight with the reactive diluent 1,6-hexanediol-diacrylate (HDDA). Films of EBECRYL® 294/25 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion and stain resistance, good exterior durability, toughness, and are resistant to yellowing.

Bermocoll® E 511 X is a non-ionic, water soluble cellulose ether. It improves the consistency, the stability, and the water retention of water based products.