Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Carrier
- Chemical Family
- Country of Origin
- Industrial Additives Functions
- Plastics & Elastomers Functions
- Product Code
- MITM13852
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Industrial Additives Features
- Labeling Claims
- Materials Features
- Key Features
Polyfill’s even distribution and free flowing properties permits higher loading levels without the generation of higher viscosities.
Applications & Uses
- Adhesive & Sealant End Applications
- Base Chemicals End Uses
- Composites Processing Methods
- Industrial Additives End Use
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Markets
- Applications
- Product Applications
- Adhesives
- Caulks & Sealants
- Carpet Backing/latex Compounding
- Cast Polymers/cast Epoxies
- Ceramics
- Cipp Rehabilitation
- Elastomers
- Flooring
- Paints & Coatings
- Rubber
- Thermoplastics
- Thermoset Plastics (Bmc/smc, Extrusion, Pultrusion, Rtm, Spray-upapplication
- Fiberglass Reinforced Plastic (Frp) Applications
- Vinyl Applications
- Wire and Cable
Properties
- Physical Form
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S002777
- Principal
Other
- Appearance (SDS)
- White grains
- Explosive Nature (SDS)
- Not explosive
- Item Number
- Odor (SDS)
- Odorless
- Other Hazards
- Exposure may aggravate those with pre-existing eye, skin, or respiratory conditions.
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Brightness 98.0 % % Hunter "L" - Chemical Properties
Value Units Test Method / Conditions Loss on Ignition 34.6 % % by Water - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d d - Physical Properties
Value Units Test Method / Conditions Bulk Density 0.4 lb/ft³ lb/ft³ Bulk Factor 0.0495 gal/lb gal/lb Median Particle Size 4.0 µm µm Sieve Fractionation (Retained) 0.0 % % +100 mesh Sieve Fractionation (Retained) 0.0 % % +325 mesh Sieve Fractionation (Retained) 0.0 % % + 200 Mesh Specific Gravity 2.42 - - Material Composition
Value Units Test Method / Conditions Aluminum Content 64.9 % % Ferric Oxide Content 0.009 % % Silica Content 0.01 % % as silicon dioxide Soda Content max. 0.3 % % Soluble Soda Content max. 0.05 % % as sodium dioxide - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 2.4 g/cm³ g/cm³ Melting Point (SDS) 3450.0 °F °F after loss of water of hydration at elevated temperatures Solubility In Water (SDS) 0.0-11.0 % %