Enhanced TDS
Identification & Functionality
- Chemical Family
- Fluids & Lubricants Functions
- Function
- Anti-Wear Agent, Corrosion Inhibitor, Antioxidant, Extreme Pressure Additive, Additive Packages
- Product Code
- MITM08182
- Technologies
- Product Families
Features & Benefits
- Fluids & Lubricants Features
- Labeling Claims
Applications & Uses
- Compatible Substrates & Surfaces
- Fluids & Lubricants End Use
- Fluids & Lubricants Type
- Markets
- Applications
- Application Information
- Industrial gear oils
- Grease
- Additin® RC 9420 is an ashless additive package with outstanding EP/AW behavior, oxidation and corrosion inhibiting properties.
- Industrial gear oils based on Additin® RC 9420 exceed following requirements:
- Timken OK load
- Oxidation stability
- Corrosion protection of steel and non-ferrous metals
- Wear protection capacity
- Load-carrying capacity (FZG test A 16.6/140°C)
- Typical treat rate to meet U.S. Steel 224 is 1.8 % by weight.
- The recommended treatment level for use in Grease applications is approx. 2-4 % by weight. Additin RC 9420 is optimized for use in soap greases and complex soap greases.
- Additin® RC 9420 does not contain lead, barium or antimony compounds.
- Due to the balanced combination of EP-, AW-, CI-,and AO-Additives in Additin® RC 9420, there is no need to use additional performance additives for the production of high performance EP greases.
Properties
- Physical Form
- Soluble In
- Solubility Data
Additin® RC 9420 is soluble in mineral oils and synthetic base oils. However, it is necessary to verify the solubility in the used base fluid and the compatibility with other additives.
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
- Packaging Type
- Product Packaging
200 kg bung-hole drums
Principal Information
- Group Principal Number
- S000008
- Principal
Storage & Handling
- Storage Conditions
In a dry place at room temperature approx. 24 months
Other
- Appearance
- Light brown liquid
- Appearance (SDS)
- Liquid
- Color (SDS)
- Yellow
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Characteristic
- Other Hazards
- None known
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Nitrogen Content 1.0 %(W/W) %(W/W) - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life1 24.0 mo mo - Physical Properties
Value Units Test Method / Conditions Density 1000.0 kg/m³ kg/m³ ASTM D1298 at 20°C Flash Point 150.0 °C °C Cleveland Open Cup Flash Point 150.0 °C °C ASTM D92 Viscosity 40.0 mm²/s mm²/s ASTM D445 at 40°C - Material Composition
Value Units Test Method / Conditions Mineral Oil Content 30.0 %(W/W) %(W/W) Phosphorus Content 0.5 %(W/W) %(W/W) Sulfur Content 23.0 %(W/W) %(W/W) - Application Information
Value Units Test Method / Conditions Dosage (Use Level) 2.0-4.0 %(W/W) %(W/W) Dosage (Use Level) 1.8 %(W/W) %(W/W) treat rate - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Flash Point (SDS) 140.0 °C °C Closed Cup Kinematic Viscosity (SDS) 38.2 cSt cSt At 40°C pH (SDS) 6.87 -