Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Function
- Curing Agent, Hardener
- Product Code
- MITM15925
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Key Features
Epoxy coating systems cured with AP 1041X90 present the following features:
- Suitable for low-temperature cure.
- High levels of mechanical stability.
- Good adhesion to marginally prepared surfaces.
- Resistance to aqueous alkaline, acid, and saline solutions.
- Good corrosion resistance.
- Due to the phenolic nature of AP 1041X90 coatings, they are likely to change the color of the film when exposed to heat and sunlight.
Applications & Uses
- Application Method
- Coating End Applications
- Compatible Polymers & Resins
- Markets
- Applications
- Product Applications
- AP 1041X90 is used in combination with liquid epoxy resins or solid epoxy resin solutions or epoxy resins modified by means of reactive as well as non-reactive diluents. Suitable for making high-solids coating compositions with a workable wide range of pot lives.
- AP1041X90 is suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings, e.g., structural steel, concrete flooring, etc. Can be used in combination with polyamides and other hardeners.
Properties
- Physical Form
Regulatory & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Principal Information
- Group Principal Number
- S001795
- Principal
Storage & Handling
- Storage Conditions
- AP 1041X90 should be stored in a dry place, preferably in the sealed original container at temperatures 5 to 30°C.
- AP 1041X90 should not be stored exposed to direct sunlight.
- Shelf life: (5 to 30°C): 12 months.
- Hazardous decomposition products: (When in fire) carbon monoxide, carbon dioxide, nitrogen oxides, and other toxic gases and vapors.
- Handling Information
- AP 1041X90 will absorb moisture and carbon dioxide when left in open containers. This may result in increased viscosity and sometimes crystallization.
- AP 1041X90 may emit fumes in the presence of high humidity (>40% RH) and in an acidic environment.
- Use personal protective equipment and follow industrial hygiene procedures.
- It is recommended to use safety glasses, protective clothing, gloves, and masks suitable for chemicals and solvents and their vapors.
Other
- ADR/RID/ADN Hazard Identification Number
- 30
- ADR/RID/ADN Proper Shipping Name
- Resin solution
- ADR/RID/ADN UN Number
- UN1866
- Appearance
- Clear amber colored liquid
- Appearance (SDS)
- Clear
- Color (SDS)
- Amber
- IATA/ICAO Emergency Response Guide
- 3L
- IATA/ICAO Proper Shipping Name
- Resin solution
- IATA/ICAO UN Number
- UN1866
- IMO/IMDG EmS Fire
- F-E
- IMO/IMDG EmS Spill
- S-E
- IMO/IMDG Proper Shipping Name
- Resin solution
- IMO/IMDG UN Number
- UN1866
- Insoluble in (SDS)
- Water
- Odor
- Amine
- Odor (SDS)
- Amine - like
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 17.0 Gardner Gardner Color Scale max. 17.0 ASTM ASTM ASTM D1544 - Chemical Properties
Value Units Test Method / Conditions Amine Value 265.0-310.0 mg KOH/g mg KOH/g ISO 9702 - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 12.0 mo mo - Physical Properties
Value Units Test Method / Conditions Density 0.97-1.01 kg/L kg/L ASTM D1475 at 25°C Dry to Set Time 4.0-5.0 hr hr BK Dry Time Recorder at 25°C Dry to Set Time 18.0-20.0 hr hr BK Dry Time Recorder at 5°C Viscosity 3000.0-6000.0 mPa.s mPa.s DIN 53015 at 25°C Viscosity 3000.0-6000.0 mPa.s mPa.s ISO 12058 at 25°C - Material Composition
Value Units Test Method / Conditions Non-Volatile Content 88.0-90.0 % % at 105°C, 1 hour - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 0.97-0.99 g/cm³ g/cm³ ASTM D1475 at 25°C Flash Point (SDS) 28.0 °C °C Abel Method Flash Point (SDS) 28.0 °C °C Closed Cup Viscosity (SDS) 3000.0-6000.0 mPa.s mPa.s ISO 12058 at 25°C