Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Binder
- Product Code
- MITM15100
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
Applications & Uses
Properties
- Physical Form
- Product Properties
- High gloss, gloss (60°) > 92%.
- Excellent resistance to chemicals and salt spray.
- low VOC
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage Conditions
- The product should be stored in dry conditions above 5°C and below 35°C with the integrity of the packaging, and prevent direct sunlight.
- The validity of this product is for 12 months, performance assessment is recommended before use after shelf life.
- The product should be protected from freezing during storage.
- It is suggested to filter before application and use up once the package is open.
- The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected.
- The viscosity can be adjusted to its original value by the addition of small amounts of an aqueous 10% solution of triethanolamine.
Other
- Appearance
- Milky white liquid
- Appearance (SDS)
- Transparent to light milky
- Density
- 1.06 g/cm³
- Density (SDS)
- 1.06 g/cm³
- Flash Point (SDS)
- min. 93.0 °C
- Hydroxyl Content
- 3.8 %
- Item Number
- Miscible in (SDS)
- Water
- Odor (SDS)
- Slight inherent odor
- Principal
- Relative Density (SDS)
- 1.06
- Shelf Life
- 12.0 mo
- Solid Content
- 49.0-51.0 %
- Viscosity
- 50.0-2500.0 mPa.s
- Viscosity (SDS)
- 50.0-2500.0 mPa.s
- pH
- 7.0-9.0
- pH (SDS)
- 7.0-9.0
- Chemical Properties
Value Units Test Method / Conditions Hydroxyl Content 3.8 % % on solid resin pH 7.0-9.0 - GB 6920-1986 - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 12.0 mo mo - Physical Properties
Value Units Test Method / Conditions Density 1.06 g/cm³ g/cm³ GB/T 4472 Viscosity 50.0-2500.0 mPa.s mPa.s Brookfield Viscometer At 25°C, #63, 30 Rpm - Material Composition
Value Units Test Method / Conditions Solid Content1 49.0-51.0 % % Internal Method - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 1.06 g/cm³ g/cm³ at 20°C Flash Point (SDS) min. 93.0 °C °C Relative Density (SDS) 1.06 - Water = 1 Viscosity (SDS) 50.0-2500.0 mPa.s mPa.s at 25°C pH (SDS) 7.0-9.0 -