BONDERITE® S-AD 1261

BONDERITE® S-AD 1261 ACHESON (U.S.Patent 4715972) is an extremely stable colloidal dispersion of uniform ultrafine molybdenum disulfide particles in highly refined petroleum oil. It is designed for use in formulating single and wide-range multi viscosity grade automotive and industrial gear oils. BONDERITE® S-AD 1261 ACHESON does not allow the emulsification of water into gear oils as do other MoS2 dispersions. The use of BONDERITE® S-AD 1261 ACHESON enables MoS2 gear oils to meet the stringent demulsification requirements of U.S. Steel specification 224 and AGMA gear oil specifications 250.03 and 250.04. BONDERITE S-AD 1261 ACHESON (known as SLA 1261) substantially reduces friction and improves the extreme pressure, load carrying, and anti wear capabilities of gear oils. It helps prevent metal-to-metal contact and surface scuffing and provides reliable lubrication in boundary conditions. Since BONDERITE® S-AD 1261 ACHESON functions independently of temperature, it performs well at high and low operating temperatures.

Principal: Henkel Corp

End Uses: Gear Oils

Chemical Family: Chemical Mixtures & Blends

Features: Broad Range of Viscosity Grade, Energy Efficient, Friction Reduction, Good Lubrication, High Load Carrying Capacity, Improved Anti-Wear, Low Operation Temperature, Noise Damping, Prevents Metal-To-Metal Contact, Reduced Gear Break-In Time, Reduced Start-up Torque

    Enhanced TDS

    Identification & Functionality

    Carrier
    Petroleum Oil
    Chemical Family
    Chemical Mixtures & Blends
    Product Code
    MITM04848
    Technologies
    Fluids & Lubricants
    Product Families
    Fluids & Lubricants — Additives
    Performance Additives

    Features & Benefits

    Fluids & Lubricants Features
    Energy Efficient,
    Noise Damping,
    Low Operation Temperature,
    Reduced Start-up Torque,
    Friction Reduction,
    Reduced Gear Break-In Time,
    Broad Range of Viscosity Grade,
    Prevents Metal-To-Metal Contact,
    High Load Carrying Capacity,
    Improved Anti-Wear,
    Good Lubrication
    Product Advantages
    • Greater energy efficiency
    • Reduced gear wear
    • Protection during intermittent, heavy load conditions
    • Reduced gear noise levels
    • Reduced start-up torque
    • Reduced new gear break-in time
    • Lower gear oil operating temperatures

    Applications & Uses

    Fluids & Lubricants End Use
    Gear Oils
    Fluids & Lubricants Type
    Gear Oils & Lubricants
    Markets
    Automotive & Transportation,
    Industrial
    Applications
    Automotive & Transportation — Lubricants & Functional Fluids
    Automotive Fluids & Lubricants
    Industrial — Chemical & Industrial Manufacturing
    Fluids & Lubricants
    Application and Usage Information
    • Method of Use:
      • Dilution
        • BONDERITE® S-AD 1261 ACHESON can be blended with most commercially available gear oils. The services of Henkel’s laboratories are available to advise and/or evaluate the compatibility of BONDERITE® S-AD 1261 ACHESON with proposed diluents, oils, and additive combinations. BONDERITE® S-AD 1261 ACHESON is compatible with most oil additive treatments.
        • When blending large quantities, the oils should be heated to about 50 - 55°C since blending is more efficient when oil viscosities are reduced. Stir BONDERITE® S-AD 1261 ACHESON thoroughly to achieve a uniform consistency; then premix equal parts of BONDERITE® S-AD 1261 ACHESON and the oil diluent before blending with the balance of the oil. Maintain continuous agitation by mechanical stirring throughout the blending operation.
    • Application
      • For best results, use BONDERITE® S-AD 1261 ACHESON) at one percent MoS2 solids by weight in the finished oil, or approximately five percent by weight of BONDERITE® S-AD 1261 ACHESON. Final concentration of BONDERITE® S-AD 1261 ACHESON may be determined by the level of performance desired.
    • Precautions: May be harmful if swallowed. May cause eye irritation. Wash thoroughly after handling. Keep container tightly closed when not in use to avoid contamination.

    Properties

    Physical Form
    Liquid
    Demulsibility Characteristics
    Property Water
    in Oil (%)    		 Total Free Water (ml) Emulsion (ml)
    U.S. Steel 224 Specification Typical Gear Oil with 5% BONDERITE® S-AD 1261 ACHESON Not Required min. 80 max. 1
    U.S. Steel 224 Specification Typical Gear Oil with 5% BONDERITE® S-AD 1261 ACHESON None 85.0 None

     

    Packaging & Availability

    Packaging Type
    Drums,
    Pails

    Storage & Handling

    Shelf Life Information
    • 2 years from date of qualification under original seal.

    Other

    Boiling Point (SDS)
    min. 260.0 °C
    Color (SDS)
    Black
    Density
    8.4 lb/gal
    Flash Point
    290.0 °C
    Flash Point (SDS)
    196.0 °C
    Group Principal Number
    S000218
    Insoluble in (SDS)
    Water
    Item Number
    ITM13839,
    ITM13840
    Median Particle Size
    max. 0.5 µm
    Odor (SDS)
    Petroleum
    Principal
    Henkel Corp
    Shelf Life
    2.0 yr
    Solid Content
    20.0 %
    Specific Gravity (SDS)
    1.031
    Vapor Pressure (SDS)
    0.1 mm Hg
    Viscosity
    12000.0 cPs
    Viscosity (SDS)
    3000.0-12000.0 cPs
    Volatile Organic Content (VOC) (SDS)
    0.0 g/L
    Shelf Life & Stability
    ValueUnitsTest Method / Conditions
    Shelf Life2.0 yryr
    Physical Properties
    ValueUnitsTest Method / Conditions
    Density8.4 lb/gallb/gal
    Flash Point290.0 °C°C
    Median Particle Sizemax. 0.5 µmµm
    Viscosity12000.0 cPscPsAt 25°C
    Material Composition
    ValueUnitsTest Method / Conditions
    Solid Content20.0 %%as molybdenum disulfide
    SDS Physical and Chemical Properties
    ValueUnitsTest Method / Conditions
    Boiling Point (SDS)min. 260.0 °C°C
    Flash Point (SDS)196.0 °C°CPensky-Martens Closed Cup (PMCC)
    Specific Gravity (SDS)1.031-
    Vapor Pressure (SDS)0.1 mm Hgmm Hg
    Viscosity (SDS)3000.0-12000.0 cPscPs
    Volatile Organic Content (VOC) (SDS)0.0 g/Lg/L