Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Code
- MITM01602
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Benefits
- Improves sandability
- Non-blooming in acid curing formulations
- Improves mar resistance
- Enhances slip
- Product Benefits
- CRAYVALLAC® WN-1265 is primarily used to enhance the sandability of wood primers and sealers by preventing blocking and balling-up.
- An additional advantage to be gained in this application is the absence of bloom when used in acid cured formulations.
- CRAYVALLAC® WN-1265 is also an effective internal lubricant for plastic compounding.
- CRAYVALLAC® WN-1265 is readily dispersed into coating formulations using a variety of techniques e.g. high-speed dispersers, bead mills and triple roll mills.
- In general, micronised waxes are best incorporated into coating systems by pre mixing with the binder. Alternatively, waxes may be added to the formulation immediately following the dispersion stage but prior to the final letdown.
- Due to the multitude of formulations, processing methods and application conditions used in the field, we strongly recommend that all products containing CRAYVALLAC® WN-1265 be tested thoroughly to ensure suitability for their intended end use.
Applications & Uses
Properties
- Physical Form
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000003
- Principal
Storage & Handling
- Storage Conditions
- Use corrosion resistant storage tanks and piping. Air-operated diaphragm pumps are preferred.
- Avoid temperature extremes. Do not freeze; store between 5°-30°C.
- Under these conditions the product may be stored for up to 4 years from production date.
Other
- Appearance
- White powder
- Color (SDS)
- Off-white
- Insoluble in (SDS)
- Water
- Item Number
- Other Hazards
- Mechanical irritation effects from dust exposure are possible at ambient temperature.
- USA/DOT UN Number
- Not Applicable
- Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 4.0 yr yr - Physical Properties
Value Units Test Method / Conditions Drop Point 143.0-148.0 °C °C Internal Method - Application Information
Value Units Test Method / Conditions Dosage (Use Level) 0.5-2.5 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 1.0075 g/cm³ g/cm³ At 23°C Median Particle Size (SDS) 8.76 µm µm D50 Melting Point (SDS) 289.0-298.0 °F °F Specific Gravity (SDS) 1.0075 - at 23°C, water = 1 Vapor Pressure (SDS) 0.0 mm Hg mm Hg