Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Carrier
- Chemical Family
- Product Code
- MITM15253
- Single Ingredient
- No
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Coating End Applications
- Compatible Substrates & Surfaces
- Markets
- Applications
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Properties
- Good wetting/clarity/wood warming.
- Good adhesion on different substrate.
- Fast film hardness development.
- Good stability/compatibility with solvent/dye.
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage Conditions
- Lacper® 4101 should be stored in dry conditions above 5°C and below 35°C with the integrity of the packaging, and prevent direct sunlight.
- The validity of Lacper® 4101 is for 6 months, performance assessment is recommended before use after more than 6 months.
- Lacper® 4101 should be protected from freezing during storage. After opening the packing, it is suggested to use up one time.
- Well filtration before using is necessary as normal water based binder.
Other
- ADR/RID/ADN Proper Shipping Name
- Not Applicable
- ADR/RID/ADN UN Number
- Not Applicable
- Appearance
- Translucent to milky liquid
- Appearance (SDS)
- Translusent to milky white
- Density (SDS)
- 1.04 g/m³
- Film Forming Temperature
- 49.0 °C
- IATA/ICAO Proper Shipping Name
- Not Applicable
- IATA/ICAO UN Number
- Not Applicable
- IMO/IMDG Proper Shipping Name
- Not Applicable
- IMO/IMDG UN Number
- Not Applicable
- Item Number
- Methylisothiazolinone Content
- 100.0 ppm
- Miscible in (SDS)
- Water
- Odor (SDS)
- Slight inherent odor
- Other Hazards
- Physical and chemical hazards: May cause pollution to water and soil., Environmental hazards: no release of dangerous substances. Do not allow to enter sewage system in case of blockage due to polymer deposition.
- Principal
- Relative Density (SDS)
- 1.04
- Shelf Life
- 6.0 mo
- Solid Content
- 34.0-36.0 %(W/W)
- Viscosity
- 10.0-500.0 mPa.s
- Viscosity
- 10.0-500.0 mPa.s
- Viscosity (SDS)
- 10.0-500.0 mPa.s
- pH
- 7.0-9.0
- pH (SDS)
- 7.0-9.0
- Chemical Properties
Value Units Test Method / Conditions pH 7.0-9.0 - GB 6920-1986 - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 6.0 mo mo - Physical Properties
Value Units Test Method / Conditions Film Forming Temperature 49.0 °C °C GB/T 9267-2008 Viscosity 10.0-500.0 mPa.s mPa.s Brookfield Viscometer at 25°C, #63, 60rpm Viscosity 10.0-500.0 mPa.s mPa.s GB/T 2794-2013 at 25°C, #63, 60rpm - Material Composition
Value Units Test Method / Conditions Methylisothiazolinone Content 100.0 ppm ppm Solid Content1 34.0-36.0 %(W/W) %(W/W) Internal Method At 150°C, 5 Cm, 20 Minutes - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 1.04 g/m³ g/m³ at 20°C Relative Density (SDS) 1.04 - Water = 1 Viscosity (SDS) 10.0-500.0 mPa.s mPa.s at 25°C pH (SDS) 7.0-9.0 -