Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Product Code
- MITM15199
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Product Performance
- Good flow.
- High salt spray resistance.
- Good mechanical properties.
- Good recoatability.
Applications & Uses
- Coating End Applications
- Product Applications
- Saturated carboxylated polyester suitable for the formulation of decorative and protective thermosetting powders in combination with epoxy resins.
- Specially designed for low temperature curing.
Properties
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Technical Details & Test Data
- Processing Information (Extrusion)
Application / Extrusion Conditions:
Extruder BUSS PCS-30 Torque 40% Speed 200 rpm Extrusion Temperature 80°C Spraying Gun GEMA PG 1-B Application Voltage 60 - 80 Kv Test Substrate Degreased steel 1 mm
Packaging & Availability
- Packaging Type
- Packaging Information
Granules:
- White opaque polyethylene bags of 25 Kg.
- One Ton pallet shrink – wrapped.
Principal Information
- Group Principal Number
- S000003
- Principal
Storage & Handling
- Storage Conditions
- The resin in its original unopened bags is stable for more than three years, stored in a dry place at temperature below 30°C.
- Avoid direct sunlight.
Other
- Appearance
- Pale granules
- Color (SDS)
- Light yellow
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Odorless
- Other Hazards
- May form combustible dust concentrations in air, Processing may release vapors and/or fumes which cause eye, skin and respiratory tract irritation.
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 3.0 ASTM ASTM ASTM D1544 50% solution - Chemical Properties
Value Units Test Method / Conditions Acid Value 68.0-77.0 mg KOH/g mg KOH/g ASTM D1639 - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life1 3.0 yr yr - Mechanical Properties
Value Units Test Method / Conditions Gloss min. 90.0 - at 60° angle Impact Resistance min. 80.0 kg·cm kg·cm ASTM D2794 - Physical Properties
Value Units Test Method / Conditions Film Thickness 60.0-80.0 µm µm Glass Transition Temperature (Tg) 60.0 °C °C Differential Scanning Calorimetry Viscosity 8.0-17.0 Pa.s Pa.s ICI-DIN 53229 at 165°C - Application Information
Value Units Test Method / Conditions Curing Time 15.0 m m at 200°C, object temperature - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 1.2 g/cm³ g/cm³ Specific Gravity (SDS) 1.2 - water=1