Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Product Code
- MITM16347
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
Applications & Uses
- Coating End Applications
- Markets
- Applications
- Product Applications
- Heat-Resistant Coatings
- Industrial Coatings
- Powder Coatings
SILRES® 604 can be used for the following applications:
- Base material for powder coatings
- Heat resistant up to 650 °C
- White formulation up to 270 °C without obvious yellowing
Properties
- Physical Form
- Product Properties
- Is usable as a sole binder for high heat resistant powder coatings
- Improves the heat resistance of powder coatings made with organic polymers.
- Helps to improve the water resistance of powder coatings.
- Increases the weather resistance of powder coatings.
- Shows good compatibility with organic powder coating resins.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S003143
- Principal
Storage & Handling
- Storage Conditions
- Store in a dry and cool place.
Other
- Appearance
- Colorless to yellowish flakes
- Color (SDS)
- Colorless dark
- Dust Explosion Class (SDS)
- Product is dust explosive
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Odorless
- Other Hazards
- Risk of dust explosion. Under certain conditions, the product can eliminate ethanol (CAS No. 64-17-5). Ethanol is classified as a physical hazard and health hazard.The hydrolysis rate of the product, and therefore also the significance of its hazard potential, are strongly dependent on the specific conditions.Endocrine disrupting properties - human health: The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.Endocrine disrupting properties - environment: The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
- Protect from Freezing
- No
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Hydroxyl Content 3.5-7.0 % % - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d d - Physical Properties
Value Units Test Method / Conditions Storage Temperature -100.0-86.0 °F °F - Material Composition
Value Units Test Method / Conditions Silicone Content 100.0 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Bulk Density (SDS) 650.0 kg/m³ kg/m³ Decomposition Temperature (SDS) min. 250.0 °C °C Density (SDS) 1.31-1.32 g/cm³ g/cm³ At 23°C Ignition Energy (SDS) 1.0-3.0 MJ MJ DIN EN 13821 63μm mesh Melting Point (SDS) 55.0-80.0 °C °C