Products

EBECRYL® 265 functions as a binder and resin in CASE ingredients. It offers abrasion resistance, excellent adhesion, improved flexibility, outdoor durability, and yellowing resistance. It is a non-yellowing grade.

Polycin® D-140 is a 100% solids, castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane systems. Polycin D-140, with its very low viscosity and secondary hydroxyl groups, will allow for the formulation of higher system solids with improved VOC reduction and longer pot-life. Polycin® D-140 will also impart the beneficial properties of castor oil derivatives, such as improved flow and levelling.

EBECRYL® 242N is a tin-free aliphatic urethane acrylate diluted in isobornyl acrylate (IBOA).

CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. CYMEL® U-1054 resin is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance properties. In can coating formulations, CYMEL® U-1054 provides an excellent balance between adhesion and film flexibility, especially after several cure cycles.

CYMEL® 350 Resin is a highly methylated, monomeric melamine resin recommended for use in both waterborne and solvent-borne systems. It has very good water solubility properties, which makes it easy to incorporate with excellent stability in emulsion systems, as it remains in the water phase and does not migrate to the polymer phase. Like CYMEL® 350 Resin, it is a very efficient crosslinking agent and is recommended for coil coatings and high solids systems. CYMEL® 350 Resin has a slightly slower cure response than other monomeric methylated melamine resins. This provides excellent flow and levelling characteristics and less solvent popping on cure

Dynasylan® SIVO 202 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications.

CYMEL® 1168 Resin is a highly monomeric, methylated/iso-butylated melamine crosslinker with a high degree of alkylation. Its high monomer content allows for the formulation of high solids coatings with excellent appearance, recoat adhesion, and flexibility. CYMEL® 1168 Resin is especially recommended for automotive topcoats, general metal finishes, and coil coatings. While CYMEL® 1168 Resin is insoluble in water, it shows excellent compatibility with water-soluble backbone polymers and provides very good stability in amine-stabilized waterborne formulations.

D.E.H.® 85 is a unmodified, phenolic hardener.

ALBIDUR® 1223 shows the highest performance in flexibilizing SILIKOPON® EF and SILIKOPON® ED without influencing chemical resistance properties, gloss, or transparency of the cured film.

EBECRYL® 3605 is a partially acrylated ester of a bisphenol A type epoxy resin. It contains both acrylate and epoxy functionalities. This resin may be cured by exposure to either ultraviolet light (UV) or electron beam (EB) in conjunction with conventional epoxy curing. It may also be cured with UV radiation using a mixed photoinitiator system consisting of free radical and cationic photoinitiators. Ebecryl®3605 has been developed for applications requiring improved coating performance properties over those obtainable with conventional UV/EB curing alone.

EBECRYL® LEO 10501 is a trifunctional diluting oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is compatible with a wide range of acrylated resins. EBECRYL® LEO 10501 can be used to produce low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food contact applications. x

EBECRYL® 4857 is a low viscosity, monomer free aliphatic urethane diacrylate which exhibits good flexibility in UV or EB cured films. The resin is designed to exhibit low yellowing and good exterior durability. Due to its low Tg the product is suitable for applications requiring haptic properties (e.g. “soft touch/feel”).

EBECRYL® 250 is an undiluted high molecular weight aliphatic urethane diacrylate resin, characterized by its light color and lower viscosity. Films of EBECRYL® 250 cured by exposure to ultraviolet light (UV), electron beam (EB) or by means of peroxide are soft and flexible, exhibiting the inherent non-yellowing properties typical of an aliphatic urethane. This resin is most often used as an additive to improve the flexibility of finished formulations.

EBECRYL® 117 is a low odor aliphatic mono-functional diluting acrylate. It is recommended for use in ultraviolet light (UV) or electron beam (EB) curable coatings to increase flexibility and improve adhesion.

EBECRYL® 1258 is a trifunctional aliphatic urethane acrylate diluted 20% by weight with hydroxypropylmethacrylate (HPMA) that does not contain any intentionally added organic tin compounds, heavy metals, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL® 1258.) Films of EBECRYL® 1258 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, and adhesion with resistance to yellowing.