Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Binder
- Product Code
- MITM12511
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Adhesive & Sealant End Applications
- Coating End Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Cure Method
- Product Applications
EBECRYL® 117 has been developed for the formulation of dual cure coatings and to improve adhesion of acrylic resins.
EBECRYL® 117 is recommended for use in:
- Acrylic adhesives
- Acrylic paints
- Improving adhesion onto melamine
- Performance Information
EBECRYL® 117 is characterized by:
- Low odor
- Low viscosity
- Reactive through hydroxyl group
UV/EB cured coatings based on EBECRYL® 117 are characterized by the following performance properties:
- Good flexibility
- Good adhesion
- Low residual odor
The properties of UV/EB cured products also depend on the choice of the other formulation components, such as reactive diluent(s), oligomer(s), additives and photo initiators.
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided.
- Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.
Other
- Appearance (SDS)
- Liquid resin
- Color (SDS)
- Colorless to yellow
- IATA/ICAO Proper Shipping Name
- Corrosive liquid, N.O.S. (2-hydroxyethyl acrylate)
- IATA/ICAO Technical name (N.O.S.)
- 2-hydroxyethyl acrylate
- IATA/ICAO UN Number
- UN1760
- IMO/IMDG Proper Shipping Name
- Corrosive liquid, N.O.S. (2-hydroxyethyl acrylate)
- IMO/IMDG Technical name (N.O.S.)
- 2-hydroxyethyl acrylate
- IMO/IMDG UN Number
- UN1760
- Item Number
- Odor
- Low odor
- Odor (SDS)
- Ester like
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
- TDG Canada Proper Shipping Name
- Corrosive liquid, N.O.S. (2-hydroxyethyl acrylate)
- TDG Canada Technical name (N.O.S.)
- 2-hydroxyethyl acrylate
- TDG Canada UN Number
- UN1760
- USA/DOT Proper Shipping Name
- Corrosive liquid, N.O.S. (2-hydroxyethyl acrylate)
- USA/DOT Technical name (N.O.S.)
- 2-hydroxyethyl acrylate
- USA/DOT UN Number
- UN1760
- Chemical Properties
Value Units Test Method / Conditions Hydroxyl Value 160.0 mg KOH/g - Physical Properties
Value Units Test Method / Conditions Density 1.1 g/mL Glass Transition Temperature (Tg) -50.0 °C Homopolymer Viscosity 70.0 cPs At 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C Density (SDS) 1.0-1.2 g/cm³ Flash Point (SDS) min. 100.0 °C Vapor Pressure (SDS) 1.33 hPa at 20°C Viscosity (SDS) 60.0-90.0 mPa.s at 25°C, rpm = 50, viscous liquid Volatile Content (SDS) 0.1-0.3 %(W/W)