Products

EBECRYL® 4738 is a weather-stable aliphatic urethane acrylate having a relatively low viscosity due to the allophanate structure. Formulations based on EBECRYL® 4738 exhibit high reactivity and result in hard coatings.

EBECRYL® 893 is a modified polyester acrylate specifically developed for UV curable field applied concrete and vinyl composition tile (VCT) floor coatings. EBECRYL 893 provides resistance to yellowing upon cure and over its lifetime. The low viscosity of EBECRYL 893 also provides latitude to achieve low viscosity formulations, which are required for field applied applications. Concrete and VCT coatings based on EBECRYL 893 provide a good balance of properties such as cure speed, adhesion, hardness, and scratch resistance. Good chemical and solvent resistance and high gloss are also obtained with concrete and VCT coatings based on EBECRYL 893.

EBECRYL® 4740 is a weather-stable aliphatic urethane acrylate having a low viscosity due to the allophanate structure. Formulations based on EBECRYL® 4740 exhibit high reactivity and yield tough and elastic polymers. Coatings formulated with EBECRYL® 4740 are characterized by very good chemical and mechanical resistances, scratch resistance, abrasion resistance, and high resistance to yellowing.

EBECRYL® 3700-20T is the bisphenol A epoxy diacrylate, EBECRYL 3700, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1), to provide a lower viscosity, easier handling product. EBECRYL 3700- 20T exhibits very fast cure response and low odor. Films of EBECRYL® 3700-20T cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, scratch resistance, and excellent chemical resistance.

EBECRYL® 8301-R is a hexafunctional aliphatic urethane acrylate that provides extremely fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL® 8301-R exhibit high hardness, scratch and chemical resistance, and are resistant to yellowing.

CRAYVALLAC® WN-1110 is a micronised modified polypropylene wax.

CRAYVALLAC® WF-3200 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. CRAYVALLAC® WF-3200 is readily dispersed into coating formulations using a variety of techniques e.g. high-speed dispersers, bead mills and triple roll mills.

UCECOAT® 7710 is a solvent free, energy curable polyurethane dispersion specifically developed for high gloss applications on wood and plastics. It exhibits high hardness and scratch resistance. UCECOAT® 7710 is not physically drying before UV curing.

CRAYVALLAC® WW-9500 is a 35% active dispersion of modified polypropylene wax in water.The low viscosity and high active content of this dispersion together with freedom from dust assist the efficiency of manufacturing processes.CRAYVALLAC® WW-9500 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties.It also retards the settlement of pigments and assists in their redispersion.

UCECOAT® 7630 is an energy curable polyurethane dispersion which is tack-free after water evaporation. It has been developed for wood coatings but can also be used for other applications, such as field applied UV curable coatings for wood, concrete, VCT (vinyl composition tile), and resilient floors. Because of its non-irritant nature and low viscosity, it can be applied safely by spray coating and curtain coating.

EBECRYL® 838 is a polyester hexaacrylate that exhibits fast cure response and moderate viscosity. Films of EBECRYL 838 cured by ultraviolet light (UV) or electron beam (EB) demonstrate good abrasion and scratch resistance, solvent resistance and hardness.

EBECRYL® 4827 is an aromatic urethane diacrylate. Films of EBECRYL® 4827 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, low color and good adhesion to various substrates.

EBECRYL® 1300 is designed as the letdown oligomer for UV thermoformable ink applications, and should be used in conjunction with the pigment grind oligomer, EBECRYL® 8413. EBECRYL® 1300 exhibits good adhesion promoting properties. When used together with EBECRYL® 8413, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.

ORGASOL® 3501 EXD NAT 1 is spheroidal copolyamide 6/12 powder with a narrow particle size distribution and an average diameter of 10μm. ORGASOL® 3501 EXD NAT 1 has a melting temperature of 142°C. An extremely high level of quality is achieved through rigorous control of the particle size distribution, ensuring excellent consistency of performance.

EBECRYL® 8210 is an aliphatic urethane acrylate that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Cured films of EBECRYL® 8210 demonstrate high hardness with good scratch, abrasion and chemical resistance. EBECRYL® 8210 also contains primary hydroxyl groups that can be utilized for dual cure polymerization. Dual cure can provide instantaneous tack-free coating surfaces via UV or EB exposure while reaction of the hydroxyl groups with a suitable isocyanate enables polymerization in regions of the coating where UV or EB energy exposure is insufficient or absent.