Products

EBECRYL® 444 is a reactive chlorinated polyester resin diluted 40% with the reactive diluent propoxylated glycerol triacrylate (OTA-480) (1). EBECRYL® 444 is not based on bisphenol A raw materials, and is tin-free. It exhibits good lithographic behavior and pigment wetting properties, and fast cure response in ultraviolet light (UV) curable coatings and inks. Cured films of EBECRYL® 444 display good adhesion to metals, and paper.

Rilsan® BESN BLACK TL is used in coatings for metal tube coatings and in plastics & elastomers for gasoline lines, hoses, and tubes. It is heat and light stabilized and functions as a binder & resin in CASE ingredients and as a resin in plastics & elastomers.

CRAYVALLAC® WF-1000, with its fine particle size and very low coefficient of friction, provides the formulator with an excellent aid to controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. Furthermore, the very high melting point of CRAYVALLAC® WF-1000 makes it an excellent choice for high temperature applications.

EBECRYL® 1140 is used in radiation-curable coatings. It functions as a binder and resin in CASE ingredients.

AP 1562 LT is a low viscosity, reactive, Phenalkamine epoxy hardener solution for epoxy resins based lacquers and coatings.

EBECRYL® 4141 is an undiluted Isocyanate-bearing urethane acrylate designed for use in two-component systems for coatings on wood, plastic and metal.

EBECRYL® 4397 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. EBECRYL® 4397 exhibits greater flexibility in comparison to other isocyanate functional urethane acrylates such as EBECRYL 4150(1).

EBECRYL® LEO 10552 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing. EBECRYL® LEO 10552 is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.

EBECRYL® P104 is an acrylated amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL P104 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Recommended levels are from 5 to 15% based on total formulation, usually combined with 3-5% photosensitizer. EBECRYL P104 can be used with EBECRYL P39 (a polymeric benzophenone derivative) for formulations requiring low residual odor.

MAINCOTE™ PR-71 is used for all protective coating applications, the first need is for adhesion to and passivation of the substrate. In the past, difficult-to-adhere-to substrates were often treated with a vinyl wash primer to passivate the substrate and provide adhesion for subsequent coats. These vinyl wash primers are increasingly difficult to use as they are very low in solids, high in VOC, and contain toxic pigments. In contrast, MAINCOTE™ PR-71 Waterborne Acrylic Resin allows the coatings manufacturer to supply primers that not only adhere to difficult metallic substrates, but also give good corrosion resistance over carbon steel. This resin's ability to be topcoated by most solvent-based coating systems makes it a very versatile water-based primer.

CRAYVALLAC® WW-1074 is a polytetrafluoroethylene (PTFE) wax used in can coating and coil coating applications. It is solvent-based and uses isopropanol as a carrier.

CRAYVALLAC® MT is used in solventborne coatings, as well as solventless and high solids coatings. It features anti-settling, high thixotropy, recoatability, and sag resistance. The product functions as a rheology modifier in CASE ingredients.

H.B. Fuller® PD-2158 is a self crosslinking vinyl latex recommended as a binder for a variety of non-woven fibers.

EBECRYL® 8804 is an aliphatic urethane diacrylate that is a high viscosity liquid at room temperature and is light in color. Films of EBECRYL® 8804 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion resistance, toughness and flexibility, and are resistant to yellowing.