Products

AP 5942 is cycloaliphatic, modified with epoxy resin stabilized polyamine adduct.

Vorite® 125 has been polymerized by a unique process, which imparts excellent thermal and viscosity stability. The Vorite® oils are polymeric plasticizers for cellulosics and elastomers in adhesives, sealants, gasket cements and belt dressings. They aid in plasticizing the reactants (polyol) for flexible urethane foams and elastomers. Other uses include lacquers, marking inks and plug valve lubricants.

EBECRYL® 4744 is an undiluted, unsaturated polyester acrylate designed for UV-curing and EB coatings.

Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations.

SURFYNOL® 104 is a multi-functional surfactant that combines dynamic wetting and molecular defoaming in waterborne coatings and inks. SURFYNOL® 104 is available in liquid form in different solvent cuts.

NANOCRYL® C 140 shows the highest performance in scratch and abrasion resistance without influencing gloss or transparency of the cured UV-coating.

Bermocoll® EBS 351 FQ is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water based products.

RHOPLEX® EC-2848 is designed to provide elastomeric coatings with an excellent balance of elongation, tensile strength and dirt pickup resistance over a wide temperature range. The elongation properties of the polymer allow coatings to bridge dimensionally unstable cracks without rupturing. It also provides an excellent balance of toughness and elasticity at both low and high temperatures without sacrificing dirt pickup resistance. Coatings based on RHOPLEX® EC-2848 retain an attractive appearance as they age.

CARPOL® GP-6015 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6000 Da. This triol is polymerized with propylene oxide and then capped with 15% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., as this polyol has low total unsaturation levels and an antioxidant package tailored for this type of market.

ACRYSOL™ RM-6000 Rheology Modifier is a nonionic urethane rheology modifier based on solvent-free1 technology offering improved efficiency without sacrificing key performance properties. The efficiency in both the medium shear and high shear range results in good flow and leveling with high film build while maintaining good sag resistance. ACRYSOL™ RM-6000 Rheology Modifier has demonstrated utility in a broad range of emulsions, including the “newer generation”, low-VOC types such as RHOPLEX™ SG-30 Acrylic Emulsion and RHOPLEX™ ML-300 Acrylic Emulsion.

TEGO® AIREX 978 is a very strong deaerator concentrate that provides excellent effectiveness against micro- and macro-foam in solvent borne, radiation-curing and high solids coatings and inks. Very suitable for high build and high viscosity applications.

TEGO® Hammer 300000 is a hammer-finish agent used in solventborne and waterborne coatings.

UCECOAT® 7655 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, both transparent and pigmented, but can also be used for other applications and substrates, such as field applied UV curable coatings for wood, concrete, VCT (vinyl composition tile), and resilient floors. This polyurethane dispersion is very reactive and exhibits very good scratch resistance. Due to the low viscosity, it can be applied by spray or curtain coater.

RHOPLEX® WL-100 is an acrylic-styrene copolymer designed for high-gloss, high-DOI (Distinctness of Image) waterborne plastic coatings where an attractive appearance and excellent dry and wet adhesion are important considerations. The favorable colloidal stability (robustness) of RHOPLEX® WL-100 accommodates a broad range of formulation types and formulation process techniques, providing the formulator with a versatile binder for a variety of applications. Robustness, along with 50% weight solids, allows the formulator to achieve volume solids above conventional waterborne binders.

AP 1562 LT is a low viscosity, reactive, Phenalkamine epoxy hardener solution for epoxy resins based lacquers and coatings.