Products

Vorite® 105 has been polymerized by a unique process, which imparts excellent thermal and viscosity stability. They function as polymeric plasticizers for elastomers in adhesive and sealant applications.

TEGO® Glide 100 is highly compatible and suitable for a multitude of applications. It provides outstanding flow and leveling properties and medium slip.

Clearstrength® XT151 is a toughness modifier and toughener that offers easier processing, good adhesion, excellent elongation, low temperature toughness, and low viscosity. It is used as a toughener in CASE ingredients, composite materials, and plastics and elastomers.

PolyJet 502 is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

Dynasylan® 2201 EQ is a bifunctional organosilane possessing a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group.

Polyfill 402SM is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

D.E.H.® 20 Epoxy Curing Agent is an economical, liquid diethylenetriamine (DETA) aliphatic polyamine hardener that provides a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. D.E.H.® 20 Epoxy Curing Agent is used for civil engineering applications, maintenance paints, and in the manufacture of epoxy-amine adducts. It is also used in adhesives, epoxy composite applications and as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 20 Epoxy Curing Agent is used for casting, potting and encapsulation.

Hostavin® 3055 liq is a low-molecular radical scavenger of the type hindered amine light stabilizer (HALS) for solventless and solventborne paints. On principle, it is also suitable in waterbome coatings. Hostavin® 3055 liq is characterized by its excellent solubility, broad compatibility, low volatility and good stabilization efficiency. It can either be added to the ready-to-use paint or incorporated during the paint production. However, as all UV stabilizers, it ought not to be added to the mill-base. Depending on the requested stabilization effect, the addition rate should be in the range of 1.0 to 3.0 %. All concentrations relate to active UV stabilizer on solid resin. Pre-trials, covering various concentrations, are highly recommended. As a non-substituted HALS, Hostavin 3055 liquid is slightly basic and because of this can have an influence on the crosslinking of binders. In such a case, the altemative use of Hostavin 3058 liquid is recommended. Since HALS is highly recommended for all outdoor durable coatings, the need for an additional UV absorber strictly depends on the UV transmittance of the final coating. Inorganically pigmented coatings with good hiding power do usually not require an additional UV absorber, clear coats certainly do.

Exolit® AP 428 is a fine-particle ammonium polyphosphate produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable. Exolit® AP 428 differs from most other commercial products in the following ways, greatly reduced solubility in water lower viscosity in aqueous suspensions, lower viscosity in PU polyol suspensions.

AP 5601 is low Viscosity, reactive polyamido amine hardener for epoxy resins based coatings.

AP 8016L is a unique light color epoxy reactive diluents for epoxy- amine systems derived from Card phenol. With mono epoxy group per mole, it reduces excessive cross linking of the system and with side chain, imparts flexibility to paint films.

Licocene® PE MS 431 granules are compatibilizers with good adhesion, cohesion, and heat resistance properties.

AP 1563 is a low viscosity, reactive, Phenalkamine epoxy hardener solution for epoxy resins based lacquers and coatings.

TEGO® Rad 2550 is a highly efficient cross-linkable slip additive and defoamer for radiation-curing inks and matte varnishes. Creates very low COF and hydrophobic surfaces with release effect.

LOTADER® 9318T is a random ethylene-vinyl acetate-maleic anhydride terpolymer (EVA- MAH). As an ethylene copolymer, LOTADER® 9318T is compatible with PE in all proportions, and with most ethylene copolymers. Vinyl acetate brings softness, flexibility, and polarity while maleic anhydride brings reactivity, leading to versatile adhesive properties to polar and non-polar substrates. As a result of high-pressure polymerization in tubular reactor, LOTADER® 9318T also exhibits high transparency (low haze). LOTADER® 9318T can be used to produce thermo-adhesive films for solid substrates like PA, PET and PU films, aluminium foils, fiber mats, foams. LOTADER® 9318T is also suitable as a tie layer between polyethylene and polyamide in blown film, cast film or in tubes co-extrusion. It can be used as a coupling agent in cables compounds formulations.