Products

EBECRYL® 264 is an aliphatic urethane triacrylate diluted 15% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA). Films of EBECRYL® 264 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, abrasion resistance, and are resistant to yellowing.

EBECRYL® 3700-25R is the bisphenol A epoxy diacrylate, EBECRYL® 3700, diluted 25% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 3700-25R exhibits low odor and fast cure response. Films of EBECRYL® 3700-25R cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, high surface hardness, and the superior chemical resistance typical of an epoxy resin.

EBECRYL® 809 is a modified polyester acrylate designed to exhibit greater flexibility and impact resistance than typical polyester acrylates. Films of EBECRYL® 809 cured by ultraviolet light (UV) or electron beam (EB) provide good flexibility, high gloss, toughness and surface hardness.

EBECRYL® 3418 is a modified bisphenol A epoxy diacrylate that exhibits excellent reactivity and reduced viscosity. Films of EBECRYL® 3418 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high flexibility, gloss, toughness, adhesion and superior chemical and scratch resistance.

UCECOAT® 6569 is a water dilutable aliphatic urethane acrylate oligomer containing approx. 5% water. UCECOAT® 6569 can be used to formulate UV/EB curable waterborne wood coatings as well as screen printing inks and varnishes. Cured films containing UCECOAT® 6569 demonstrate good adhesion to a variety of wood types, along with good flexibility, resistance to yellowing, and resistance to water and solvents. UCECOAT® 6569 based coatings can be re-coated after curing.

EBECRYL® 244 is an aliphatic urethane diacrylate diluted 10% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA) (1). EBECRYL® 244 exhibits light color and good cure response. Films of EBECRYL® 244 cured by ultraviolet light (UV) or an electron beam (EB) demonstrate good flexibility, toughness, abrasion and water resistance, and are resistant to yellowing.

EBECRYL® 294/25 is an aliphatic urethane triacrylate diluted 25% by weight with the reactive diluent 1,6-hexanediol-diacrylate (HDDA). Films of EBECRYL® 294/25 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion and stain resistance, good exterior durability, toughness, and are resistant to yellowing.

EBECRYL® 1300 is designed as the letdown oligomer for UV thermoformable ink applications, and should be used in conjunction with the pigment grind oligomer, EBECRYL® 8413. EBECRYL® 1300 exhibits good adhesion promoting properties. When used together with EBECRYL® 8413, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.

EBECRYL® 1871 is a hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink-water balance necessary for good lithographic printing. Lithographic inks based on EBECRYL® 1871 display excellent rheological properties ensuring good ink transfer from the printing plate to the blanket and then to the substrate, combined with good dot definition. EBECRYL® 1871 has been specifically developed to formulate low migration UV/EB curable inks for indirect food contact applications.

EBECRYL® 85 is a low viscosity amine modified polyether acrylate that provides high reactivity in low extractable, low odor energy curable coatings and inks. Coatings and inks based on EBECRYL® 85 exhibit a low odor after UV or EB curing.

EBECRYL® 3603 is an epoxy novolac acrylate diluted 20% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) . EBECRYL 3603 exhibits rapid cure upon exposure to ultraviolet light (UV) or electron beam (EB) and superior chemical and thermal resistance.

EBECRYL® 838 is a polyester hexaacrylate that exhibits fast cure response and moderate viscosity. Films of EBECRYL 838 cured by ultraviolet light (UV) or electron beam (EB) demonstrate good abrasion and scratch resistance, solvent resistance and hardness.

EBECRYL® 452 is a low viscosity polyester acrylate oligomer that exhibits exceptional pigment wetting properties making it an ideal pigment grinding resin. EBECRYL® 452 also gives a fast cure response when formulated with other oligomers and cured via ultraviolet light (UV) or electron beam (EB). EBECRYL® 452 is used for the preparation of highly loaded pigment pastes produced using 3-roll or bead mills. EBECRYL® 452 can be used for grinding all process colors and spot colors.

EBECRYL® LEO 10552 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing. EBECRYL® LEO 10552 is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.

EBECRYL® LEO 10501 is a trifunctional diluting oligomer that provides low extractables, low odor and low migration after UV or EB curing. It is compatible with a wide range of acrylated resins. EBECRYL® LEO 10501 can be used to produce low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food contact applications. x