Products

EBECRYL® 4265 is an aliphatic urethane acrylate without reactive diluent. It is characterized by its low viscosity and yields coatings with good chemical and mechanical properties.

EBECRYL® 4220 is an aliphatic urethane acrylate diluted 25% in tripropyleneglycol diacrylate (TPGDA). EBECRYL® 4220 produces tough coatings that resist yellowing.

EBECRYL® 8811 is used in radiation-curable coatings and functions as a binder and resin in CASE ingredients.

EBECRYL® 5850 is a high performing medium viscosity bio-based diacrylate. When properly formulated, coatings and inks based on EBECRYL® 5850 cured by ultraviolet light (UV) or electron beam (EB) energy display high reactivity with good hardness and scratch resistance.

EBECRYL® 1140 is used in radiation-curable coatings. It functions as a binder and resin in CASE ingredients.

EBECRYL® 4397 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. EBECRYL® 4397 exhibits greater flexibility in comparison to other isocyanate functional urethane acrylates such as EBECRYL 4150(1).

EBECRYL® 6203 is used in radiation-curable coatings, solder resists, and marking inks. It features excellent adhesion, good hardness, heat resistance, and medium viscosity. The product functions as a binder and resin in CASE ingredients.

EBECRYL® 4744 is an undiluted, unsaturated polyester acrylate designed for UV-curing and EB coatings.

EBECRYL® 3420 is a low viscosity, modified epoxy acrylate with good pigment wetting ability. In UV offset, the final ink produced with this resin exhibits an enhanced ink water balance and good misting. EBECRYL® 3420 can be used to produce a UV flexo ink with good flow, high gloss and high reactivity.

EBECRYL® LEO 10601 is a modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. EBECRYL® LEO 10601 exhibits good pigment wetting properties and produces UV offset inks exhibiting enhanced ink water balance and low misting. EBECRYL® LEO 10601 can also be used to produce UV flexo inks with good flow, high gloss and high reactivity.

EBECRYL LEO® 10103 is a multifunctional acrylate that in the presence of an amine synergist can enable the UV curing of printing inks and coatings without, or with only a minimal amount, of photoinitiator. The elimination or reduction of photoinitiator decreases the potential for migration in indirect food contact applications. EBECRYL LEO® 10103can be used for low migration over print varnishes along with flexographic and offset inks in the entire color range, including white. EBECRYL LEO® 10103 at 10-20% by weight in a coating or ink can provide a good balance of surface and through cure.

EBECRYL® 50 is the tetraacrylate ester of 5 mole ethoxylated pentaerythritol. It is a low viscosity diluting oligomer characterized by low odor and light color. EBECRYL® 50 provides fast cure response in ultraviolet light (UV) or electron beam (EB) cured coatings and inks. Besides its high reactivity, EBECRYL® 50 improves the hardness and solvent resistance of cured coatings and inks. EBECRYL® 50 is particularly useful in offset inks, flexo inks and overprint varnishes.

EBECRYL® 8465 is used in radiation-curable coatings and functions as a binder and resin in CASE ingredients.

EBECRYL® 117 is a low odor aliphatic mono-functional diluting acrylate. It is recommended for use in ultraviolet light (UV) or electron beam (EB) curable coatings to increase flexibility and improve adhesion.

EBECRYL® 4200 is an undiluted, unsaturated aliphatic urethane acrylate designed for wood coatings (cork and parquet) with a high grit feeder abrasion resistance.