Products

Castorcin™ 208 is a 100% solids castor oil based reactive diluent having good compatibility and wetting. This polyol is a tetrahydroxy ester, with three primary and one secondary hydroxyl groups, making it an attractive material for chemical reactions.

BONDERITE® S-FN SB-2 solvent is a special blend of solvents designed to offer optimum handling properties with a wide number of Henkel Corporation thermosetting coatings including BONDERITE® S-FN 330 ACHESON, BONDERITE® S-FN GP 1904 ACHESON, and others.

EBECRYL® 151 is a pigment grinding vehicle for energy curable inkjet inks. When used in conjunction with EBECRYL® 151 (a letdown vehicle), jettable, stable inks are obtained for use in drop-on-demand piezo inkjet systems.

EBECRYL® 110 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. EBECRYL® 110 is used in ultraviolet light (UV) or electron beam (EB) cured coatings to control viscosity and increase flexibility.

TPGDA-A is a difunctional reactive diluent with a branched alkyl polyether backbone. Polymerization occurs when TRIPROPYLENE GLYCOL DIACRYLATE is exposed to sources of free radicals. It is widely used as a primary diluent in the formulation of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. TRIPROPYLENE GLYCOL DIACRYLATE is a grade of tripropylene glycol diacrylate with lower inhibitor content than the standard grade (TPGDA).

EBECRYL® 180 is a multifunctional reactive diluent with a high degree of acrylic unsaturation and finds use in a variety of ultraviolet light (UV) and electron beam (EB) curable coatings and ink systems where a high degree of crosslinking is desired. EBECRYL® 180 is a mixture of predominantly the tri- and tetra-acrylate esters of pentaerythritol. EBECRYL® 180 has a higher ratio of tetra- to tri-acrylate ester than the similar product PETIA, and therefore typically crystallizes at normal ambient temperatures.

Polycin® GR-50 is a 100% solids, castor oil-based derivative designed for use as a primary polyol or reactive diluent in polyurethane sealants and adhesives systems. Polycin® GR-50 imparts low hardness and provides VOC reduction while offering the beneficial properties of castor oil derivatives, such as improved flow and levelling.

NPG(PO)2DA is useful as a reactive diluent in formulating ultraviolet light (UV) and electron beam (EB) curable coatings and inks. NPG(PO)2DA provides efficient viscosity reduction of viscous resins, good flow and wetting, and greater flexibility than other common difunctional acrylate diluents.

EBECRYL® 118 is an aromatic monofunctional acrylate that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. EBECRYL® 118 is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg and increase flexibility of the UV/EB cured polymer while maintaining strength and toughness and improving substrate adhesion.

EBECRYL® 113 is a low odor monofunctional acrylated aliphatic epoxy that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. EBECRYL® 113 is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg, increase flexibility and improve adhesion to plastics.

TPGDA is a difunctional reactive diluent with a branched alkyl polyether backbone. Polymerization occurs when TPGDA is exposed to sources of free radicals. It is widely used as a primary diluent in the formulation of ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks.

Polycin® 1679-M3 is a 100% solids, castor oil-based derivative designed for use as a primary polyol or reactive diluent in polyurethane sealants and adhesives systems. Polycin® 1679-M3 imparts medium hardness and provides VOC reduction while offering the beneficial properties of castor oil derivatives, such as improved flow and levelling.

APODIL 1005 is a mono glycidyl ester of branched carboxylic acid. The product is used as reactive diluent for high viscosity epoxy resins.

AP 8030 is a unique pale colored non reactive diluent based on cashew nut shell liquid technology. It is an ether alcohol with unsaturated long chain in meta position. Due to its non reactivity with both epoxy resins as well as amine hardeners at ambient temperature, it can be used in both the components in epoxy-amine systems to reduce viscosity, make low VOC and application friendly compositions.

EBECRYL® PEG200DMA (polyethylene glycol di-methacrylate), CAS N° 25852-47-5, is a difunctional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® PEG200DMA forms homopolymers and copolymers. EBECRYL® PEG200DMA is compatible with a wide range of acrylated and methacrylated resins.