Products

Stabaxol® KE 7646 is a polycarbodiimide-masterbatch, carrier polymer, polyethyleneterephthalate (PET). It functions as antihydrolysis agent for thermoplastic polyesters, especially for PET. Stabaxol® KE 7646 can be used in PET monofilaments for dryer-conveyor belts in paper making machines where it assists to multiply the service life time.

CYMEL® U-93-210 Resin is an n-butylated urea formaldehyde resin supplied in a mixture of n-butanol and xylene. It has excellent compatibility with epoxy resins and is recommended in primer formulations which are to be topcoated and rebaked.

ZINCUM SW 2309 is in low bulk density, fine white powder.

D.E.R.® 333 is a highly reactive liquid resin intermediate of the epichlorohydrin-bisphenol a type diluted by xylene.

Staybelite® Ester 5 rosin is the glycerol ester of partially hydrogenated gum rosin, specially processed for superior taste and odour characteristics. It is a pale, thermoplastic rosin with excellent resistance to oxidation and discoloration. Its principal use is in chewing gum bases where it imparts masticatory properties in combination with polymers and other ingredients. The oxidation resistance of Staybelite Ester 5 resin helps finished chewing gums retain chewability, consistency and flavour throughout their shelf lives.

Europrene® SOL T 9326 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and isoprene, where bound styrene content is 30 % wt and diblock content is 15 %. A non-staining, TNPP free antioxidant system is added during the production process.

H.B. Fuller® PD-0128 is a binder and resin with excellent scrub resistance, used in waterborne adhesives for adhesives, sealants, and architectural coatings.

CEAMGUM 3020 is a locust bean gum based product, consisting on a high molecular weight polysaccharide, which is obtained from the ground endosperm of the locust bean SC (Ceratonia Silica).

EBECRYL® 820 is a low viscosity polyester acrylate oligomer, with exceptional pigment wetting properties. This combined with the low viscosity of this material makes it ideal as a pigment grinding resin. EBECRYL® 820 also gives a fast cure response when formulated with other oligomers and cured via ultraviolet light (UV) or electron beam (EB). EBECRYL® 820 is used for the preparation of pigment pastes with high pigment loading. This can be produced using a triple roll mill or bead mill. EBECRYL® 820 can be used for grinding all process colors and spot colors. EBECRYL® 820 has been specifically developed to formulate UV/EB curable inks for sensitive applications such as food packaging.

EBECRYL® 244 is an aliphatic urethane diacrylate diluted 10% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA) (1). EBECRYL® 244 exhibits light color and good cure response. Films of EBECRYL® 244 cured by ultraviolet light (UV) or an electron beam (EB) demonstrate good flexibility, toughness, abrasion and water resistance, and are resistant to yellowing.

Desi Pak® 1 UNIT DP SAP4593 1300/DR 71 is a desiccant product.

BONDERITE® S-FN M 254N is one of a series of Henkel’s Acheson resin- bonded lubricant coatings designed to provide dry film lubrication in a variety of industrial, consumer and military applications. BONDERITE® S-FN M 254N is a synergistic combination of MoS2 and other lubricants dispersed in an epoxy resin solution. BONDERITE® S-FN M 254N can be applied by standard brush, dip-spin, or spray techniques. BONDERITE® S-FN M 254N provides lifetime lubrication and good corrosion resistance for components which are inaccessible after assembly, but nevertheless must continue to function reliably. BONDERITE® S-FN M 254N provides an effective performance, even as a very thin film (0.0003 inch or 8 microns), thus there is little interference with operating tolerances.

B 4001 is a liquid Bio-plasticizer for PVC.