Products

Exolit® AP 435 is a fine particle ammonium polyphosphate (phase II) optimized for low viscosity in aqueous suspension and intumescent coatings. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable.

Ceridust® 3620 is a micronized polyethylene wax.

Licowax® C powder is a Amide wax.

Clearstrength® XT152 is high performance toughening agent tailored for low polar methacrylic resins.

Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit® AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit® AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gasses, lower formation of toxic smoke gasses are of great interest.

Licocene® PP 1502 granules is a propylene-Ethylene-Copolymer Wax.

Baerolub® FTA Veg Prill is a relatively high bulk density, free flowing prills.

Hostavin® 3055 liq is a low-molecular radical scavenger of the type hindered amine light stabilizer (HALS) for solventless and solventborne paints. On principle, it is also suitable in waterbome coatings. Hostavin® 3055 liq is characterized by its excellent solubility, broad compatibility, low volatility and good stabilization efficiency. It can either be added to the ready-to-use paint or incorporated during the paint production. However, as all UV stabilizers, it ought not to be added to the mill-base. Depending on the requested stabilization effect, the addition rate should be in the range of 1.0 to 3.0 %. All concentrations relate to active UV stabilizer on solid resin. Pre-trials, covering various concentrations, are highly recommended. As a non-substituted HALS, Hostavin 3055 liquid is slightly basic and because of this can have an influence on the crosslinking of binders. In such a case, the altemative use of Hostavin 3058 liquid is recommended. Since HALS is highly recommended for all outdoor durable coatings, the need for an additional UV absorber strictly depends on the UV transmittance of the final coating. Inorganically pigmented coatings with good hiding power do usually not require an additional UV absorber, clear coats certainly do.

Licowax® PE 130 Powder is a high density polyethylene wax.

AEROSIL® R 972 RHE Coating is a fumed silica after-treated with DDS (dimethyldichlorosilane). It is easytodisperseand suitablefor a broad rangeof applications.

Ceresweet 40 - Organic CGFMCS4099 is used in bakery, confectionery, and dairy applications and helps reduce off-flavors.

Licocene® PP MA 7452 granules are used in hot melt adhesives. They feature good wetting, improved cohesion, and enhanced adhesion, along with good mechanical properties and reduced moisture uptake. It functions as an adhesion promoter, coupling agent, and wetting agent in both CASE ingredients and plastics & elastomers.

Licomont® NaV 101 is sodium soap of montanic acids

Licowax® E powder is an ester of montanic acids with multifunctional alcohols. The montanic acids contained in raw montan wax are straightchain, unbranched monocarboxylic acids with a chain length in the range of C₂₈ -C₃₂ . As a result of the long chain these montanic acids have a high thermostability and a low volatility as well as a low tendency to migration. Licowax E powder is used as lubricant and dispersing agent in a wide variety of polymers like PVC, PS, PBT, PA, PDM, PC, TPU.

Hostavin® 3206 liq is a highly effective, oxalanilide based, liquid UV-B absorber. It is characterized by its excellent compatibility in all solventborne coatings, with an improved resistance to migration and low volatility, under normal stoving conditions as well as low color in wet paint.