Products

Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit® AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit® AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gasses, lower formation of toxic smoke gasses are of great interest.

Pale 4 polymerized castor oil oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents. Pale 4 polymerized castor oil is used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. It is a processing aid and plasticizer for rubber polymers.

CRAYVALLAC® PA3 X 20 is used in solventborne coatings, top coats, varnishes, and wood coatings. It is compatible with acrylics, alkyds, nitrocellulose, and polyurethanes (PU) and is suitable for wood substrates.

Kane Ace® PA-81 is a medium molecular weight acrylic polymer that enhances the processing of PVC based formulations. Kane Ace® PA-81 is an excellent general-purpose processing aid that promotes a wide processing window, providing the flexibility to limit the number of processing aids for various applications especially transparent films.

Bluesil™ SP 3304 is a non-hydrolysable polyether modified polydimethylsiloxane.

CRAYVALLAC® WF-6010 is a wax product consisting of paraffin waxes and hydrocarbon waxes.

Indopol® H-8 is a polybutene plasticizer from the polyalkene chemical family.

EBECRYL® 740/40TP is an acrylic oligomer diluted with 40% tripropyleneglycol diacrylate (TPGDA). This resin is designed to provide improved adhesion to difficult substrates.

GENIOPLAST® PELLET S is a pelletized silicone gum formulation with an outstanding high loading of ultrahigh molecular weight siloxane polymer.

AP 4406 is modified aliphatic amine hardener used with liquid epoxy resin based systems at ambient as well as low temperature.

AP 1562 LT is a low viscosity, reactive, Phenalkamine epoxy hardener solution for epoxy resins based lacquers and coatings.

TERMUL® 3540 is the 40-mole ethoxylate of castor oil.

Kane Ace® M-210 is a high efficiency core-shell polymer designed to improve the impact properties of polymethyl methacrylate (PMMA) while maintaining clarity.