Products

EBECRYL® 8604 is an aliphatic urethane tetraacrylate. As the main resin, EBECRYL 8604 offers excellent reactivity combined with good hardness and toughness. As a co-resin, EBECRYL 8604 blended with higher functional (penta or greater) oligomer(s) improves reactivity and weatherability while increasing the ductility with minimum impact surface hardness. Films of EBECRYL 8604 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, hardness, and excellent exterior durability.

EBECRYL® LEO 10502 is a low viscosity polymeric tetrafunctional polyether acrylate that provides low extractables, low odor and low migration after UV or EB curing. EBECRYL® LEO 10502 is recommended for use in low odor and low migrating UV/EB curable overprint varnishes (OPV’s) and inks.

EBECRYL® 3700-20T is the bisphenol A epoxy diacrylate, EBECRYL 3700, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1), to provide a lower viscosity, easier handling product. EBECRYL 3700- 20T exhibits very fast cure response and low odor. Films of EBECRYL® 3700-20T cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, scratch resistance, and excellent chemical resistance.

ROVACE™ 9900 Emulsion Polymer represents the new generation of vinyl acrylic binders for architectural coatings. This unique binder sets a new standard of performance for architectural paints. ROVACE 9900 Emulsion Polymer does not require the use of coalescing solvents for film formation and application properties. This new, state of the art solvent-free PVA demonstrates comparable or even higher scrub resistance than the best of the high scrub PVAs at various PVC levels and volume solids. The other distinct advantage is the low odor, both in the form of emulsion and also in finished paint. Excellent pigment binding allows a wide range of pigment volume concentrations from flat to semigloss with outstanding properties.

EBECRYL® 3700 is the diacrylate ester of a bisphenol A epoxy resin, and exhibits low odor and exceptional cure response. Films of EBECRYL® 3700 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness, high gloss, and excellent chemical resistance. EBECRYL® 3700 finds broad use in UV/EB applications, such as coatings, overprint varnishes, inks, adhesives, and electronics.

EBECRYL® 8315 is an aliphatic urethane tetraacrylate diluted with the reactive diluent hydroxypropyl methacrylate (HPMA). Films of EBECRYL® 8315 cured by ultraviolet light (UV) or electron beam (EB) have a unique combination of hardness, toughness, flexibility, and abrasion resistance coupled with outstanding exterior durability properties. These performance properties make EBECRYL® 8315 ideal for applications such as paint protection, printed electronics, automotive interior film and embossing or thermoforming after cure.

EBECRYL® LEO 10601 is a modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. EBECRYL® LEO 10601 exhibits good pigment wetting properties and produces UV offset inks exhibiting enhanced ink-water balance and low misting. EBECRYL® LEO 10601 can also be used to produce UV flexo inks with good flow, high gloss and high reactivity.

EBECRYL® 113 is a low odor monofunctional acrylated aliphatic epoxy that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. EBECRYL® 113 is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg, increase flexibility and improve adhesion to plastics.

Focus Ester OE 1505 is specially designed to use in water-dilutable metalworking coolants. Focus Ester OE 1505 will provide lubrication and corrosion protection with outstanding wetting characteristics. Using Focus Ester OE 1505 will reduce or eliminate the amount of additives needed in metalworking coolants, like chlorine, fatty acids and amides. Focus Ester OE 1505 does not contain any phosphorus, chlorine or sulfur and is ashless.

EBECRYL® 4827 is an aromatic urethane diacrylate. Films of EBECRYL® 4827 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, low color and good adhesion to various substrates.

EBECRYL® 3702 is a fatty acid modified bisphenol A epoxy diacrylate that exhibits outstanding flow and leveling and pigment wetting properties. Films of EBECRYL® 3702 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, improved water resistance and good chemical resistance.

ACOUSTICRYL™ AV-1420 is powered by the AVANSE™M Resin Technology, is an acrylic copolymer emulsion designed specifically for the use in sprayable waterborne damping coatings.

RHOPLEX® MV-23LO is an aqueous, all-acrylic binder designed for interior and exterior wood primers and stain-blocking sealers. It is a versatile vehicle that can be used in both the formulation of primers that upgrade difficult substrates into sound repaint surfaces, and stain blocking sealers that minimize the "bleed through" of wood tannins and common household stains.

TAMOL® 2011 is a high-performance, hydrophobic copolymer dispersant especially useful for semi-gloss and gloss paints. TAMOL® 2011 is well suited for today’s generation of formulations as it is made without solvents or APEO surfactants. TAMOL® 2011 is particularly well fitted for formulations that contain hydrophobically modified urethane rheology modifiers.

ROVACE™ 10 Vinyl Acrylic Emulsion is a durable, general-purpose vinyl acrylic emulsion designed for use in architectural coatings. It can be formulated over a wide range of pigment volume concentrations to provide cost effective, low odor, and improved environmental paint systems. It requires little or no coalescing solvents to form a continuous film at low temperatures. ROVACE 10 is made with no APEO -containing surfactants. In addition, ROVACE 10 offers excellent processing capabilities making it easy to pump and handle during the manufacturing process.