Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Country of Origin
- Function
- Binder
- Product Code
- MITM11395
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Product Features
Paints formulated with RHOPLEX® SS 4
- Offer a balance of excellent cost and performance characteristics
- Offer excellent pigment and sand-binding capacity
- Offer superior resistance to wear
- Possess quick-drying tendencies
- Product Performance
Performance of Paints Based on RHOPLEX® SS 4: Surface coatings based on RHOPLEX® SS 4 have exhibited an excellent record of very good wear resistance. These coatings can be used for base coats or for stripping. The binding capacity of these paints allow for high volume solids, while maintaining excellent adhesion.
Applications & Uses
- Application Area
- Coating End Applications
- Compatible Substrates & Surfaces
- Markets
- Applications
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Safety & Health
- Safety Precautions
Disposal Considerations: Dispose in accordance with all local, state (provincial) and federal regulations. Empty containers may contain hazardous residues.RHOPLEX® SS 4 and its container must be disposed in a safe and legal manner.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000005
- Principal
Storage & Handling
- Storage Conditions
Store products in tightly closed original containers at temperatures recommended on the product label.
- Handling Information
- Keep combustible and/or flammable products and their vapors away from heat, sparks, flames and other sources of ignition including static discharge. Processing or operating at temperatures near or above product flashpoint may pose a fire hazard. Use appropriate grounding and bonding techniques to manage static discharge hazards.
- Failure to maintain proper volume level when using immersion heaters can expose tank and solution to excessive heat resulting in a possible combustion hazard, particularly when plastic tanks are used.
Other
- Color (SDS)
- White
- Item Number
- Odor (SDS)
- Ammonia
- Other Hazards
- No data available
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions pH 8.8 - - Physical Properties
Value Units Test Method / Conditions Bulking Value 0.112 gal/lb gal/lb as wet Bulking Value 0.107 gal/lb gal/lb dry basis Density 8.9 lb/gal lb/gal wet Film Forming Temperature 7.0 °C °C Storage Temperature 34.0-120.0 °F °F Viscosity 850.0 cPs cPs at 25°C, 60 rpm, #3 spindle - Material Composition
Value Units Test Method / Conditions Solid Content 60.5 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 100.0 °C °C Evaporation Rate (SDS) max. 1.0 % % Butyl acetate = 1 Melting Point (SDS) 0.0 °C °C Relative Vapor Density (SDS) max. 1.0 - Air = 1 Specific Gravity (SDS) 1.0-1.2 - Water = 1 Storage Temperature (SDS) 1.0-49.0 °C °C Vapor Pressure (SDS) 17.0 mm Hg mm Hg at 20°C Viscosity (SDS) 300.0-1200.0 mPa.s mPa.s Volatile Content (SDS) 38.0-40.0 % % Water pH (SDS) 8.5-9.3 -