Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Code
- MITM14706
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
Applications & Uses
- Coating End Applications
- Markets
- Applications
- Product Applications
- Coating of wire goods and piping
- Components exposed to high weathering or corrosive environments
- Coating of machinery exposed to high abrasion such as spline shafts
- Coating of springs for sound reduction
- Rilsan® fluid bed powders are designedto coat metal substrates via fluidizedpowder bed dipping
- Good adhesion after over 2000hours of salt spray testing (ISO 9227)
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
- Product Packaging
Available in 100lb drums
Principal Information
- Group Principal Number
- S000003
- Principal
Other
- Appearance
- Smooth texture with a glossy
- Color (SDS)
- White
- Insoluble in (SDS)
- Most organic solvents
- Other Hazards
- Prolonged or repeated exposure may cause: headache, drowsiness, nausea, weakness, (severity of effects depends on extent of exposure), Handle in accordance with good industrial hygiene and safety practice. (powder) Mechanical irritation effects from dust exposure are possible at ambient temperature. This product may release fume and/or vapor of variable composition depending on processing time and temperature. This material may contain residual caprolactam monomer.
- USA/DOT UN Number
- Not Applicable
- Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 5.0 yr yr - Electrical Properties
Value Units Test Method / Conditions Dielectric Strength 1100.0 kV/mm kV/mm ASTM D149 at 150µm - Mechanical Properties
Value Units Test Method / Conditions Impact Resistance 160.0 J J ASTM D2794 - Physical Properties
Value Units Test Method / Conditions Melting Point 183.0-193.0 °C °C ISO 1218 Sieve Fractionation (Through) 15.0 % % ASTM D3451 70μm mesh Specific Gravity 1.11 - ISO 1183 at 20°C, of coating - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Decomposition Temperature (SDS) 662.0 °F °F Enthalpy of Combustion (SDS) 35000.0 kJ/kg kJ/kg Melting Point (SDS) 184.0-192.0 °C °C Specific Gravity (SDS) 1.0-1.3 - Water = 1