Products

Toyal 7150N is a medium-coarse particle sized non-leafing aluminum pigment, with irregular flake geometry. It is a mixture of mineral spirits and high aromatic solvents.

D.E.R.® 3680-X90 is used in protective coatings and functions as a binder and resin in CASE ingredients.

EBECRYL® 3702 is a fatty acid modified bisphenol A epoxy diacrylate that exhibits outstanding flow and leveling and pigment wetting properties. Films of EBECRYL® 3702 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, improved water resistance and good chemical resistance.

RHOPLEX® HG-706 is the new binder is designed for interior and exterior VOC compliant gloss and semigloss enamels, allowing formulators to produce high-performance coatings at 50 g/l VOC. RHOPLEX® HG-706 takes advantage of innovative technology to improve enamel performance over that of conventional latex polymers. The combination of an all-acrylic backbone and ambient-cure crosslinking technology provides superior performance in formulations ranging from 50 to 150 g/l VOC. Enamels based on RHOPLEX® HG-706 provide excellent adhesion, block, and stain removal.

Toyal TCR3140 is a non-leafing aluminum paste used in fully circulation resistant.

RHOPLEX® WL-81, waterborne, acrylic polymer is specifically designed for the formulation of clear and pigmented ambient or forced-air-dry industrial lacquers. Coating systems based on this polymer are suitable for use on a variety of substrates and offer a number of key benefits currently provided by solvent borne industrial lacquers, but without the flammability, odor, or other problems inherent with such systems.

ACRYSOL™ RM-1020 is a thickener from the chemical mixtures and blends family.

ACRYSOL™ DR-300 associative thickener delivers effective shear-thinning rheology in coatings ranging from matt to semi-gloss, with a primary focus on exterior applications. The distinctive viscosity profile of this synthetic liquid thickener ensures sag resistance for higher film builds, all while maintaining the improved flow typical of associative thickeners. ACRYSOL™ DR-300 also provides good early water resistance to acrylic, styrene-acrylic, and vinyl-acrylic coatings, even on chalky or aged surfaces. As with all Designed Rheology products, ACRYSOL™ DR-300 is easily incorporated during the paint manufacturing process. A key benefit of ACRYSOL™ DR-300 is that it offers superior performance at a lower formulation cost compared to traditional cellulosic thickeners, owing to its enhanced thickening efficiency.

RHOPLEX® DCR-317 is an aqueous all-acrylic emulsion polymer designed for formulating into high solids Deck and, Concrete Restoration coatings. Restoration coatings can be formulated with RHOPLEX® DCR-317 Binder to help provide excellent flexibility and dirt pick- up resistance, in addition to adhesion to concrete and well-weathered wood.

EBECRYL® 118 is an aromatic monofunctional acrylate that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. EBECRYL® 118 is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg and increase flexibility of the UV/EB cured polymer while maintaining strength and toughness and improving substrate adhesion.

EBECRYL® 893 is a modified polyester acrylate specifically developed for UV curable field applied concrete and vinyl composition tile (VCT) floor coatings. EBECRYL 893 provides resistance to yellowing upon cure and over its lifetime. The low viscosity of EBECRYL 893 also provides latitude to achieve low viscosity formulations, which are required for field applied applications. Concrete and VCT coatings based on EBECRYL 893 provide a good balance of properties such as cure speed, adhesion, hardness, and scratch resistance. Good chemical and solvent resistance and high gloss are also obtained with concrete and VCT coatings based on EBECRYL 893.

RHOPLEX® VSR-5102 is a 100% Acrylic Binder designed for low-VOC interior and exterior flat to semi-gloss coatings. RHOPLEX® VSR-5102 can be formulated with little or no coalescent to pass the most stringent VOC regulations and is manufactured without the use of APEO surfactants. RHOPLEX® VSR-5102 offers a good balance of abrasive scrub resistance and stain removal along with very good exterior durability and dirt pick up resistance facilitating the formulation of high quality, low-VOC and low odor interior and exterior paints.

EBECRYL® 4740 is a weather-stable aliphatic urethane acrylate having a low viscosity due to the allophanate structure. Formulations based on EBECRYL® 4740 exhibit high reactivity and yield tough and elastic polymers. Coatings formulated with EBECRYL® 4740 are characterized by very good chemical and mechanical resistances, scratch resistance, abrasion resistance, and high resistance to yellowing.

EBECRYL® 4857 is a low viscosity, monomer free aliphatic urethane diacrylate which exhibits good flexibility in UV or EB cured films. The resin is designed to exhibit low yellowing and good exterior durability. Due to its low Tg the product is suitable for applications requiring haptic properties (e.g. “soft touch/feel”).

EBECRYL® 1258 is a trifunctional aliphatic urethane acrylate diluted 20% by weight with hydroxypropylmethacrylate (HPMA) that does not contain any intentionally added organic tin compounds, heavy metals, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL® 1258.) Films of EBECRYL® 1258 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, and adhesion with resistance to yellowing.