Products

EBECRYL® 150 is an ethoxylated bisphenol A diacrylate commonly used as reactive diluent in UV/EB cure applications. EBECRYL® 150 can improve the cure response, hardness, and chemical resistance of UV/EB curable coatings and inks while maintaining good adhesion, and without imparting brittleness.

EBECRYL® 180 is a multifunctional reactive diluent with a high degree of acrylic unsaturation and finds use in a variety of ultraviolet light (UV) and electron beam (EB) curable coatings and ink systems where a high degree of crosslinking is desired. EBECRYL® 180 is a mixture of predominantly the tri- and tetra-acrylate esters of pentaerythritol. EBECRYL® 180 has a higher ratio of tetra- to tri-acrylate ester than the similar product PETIA, and therefore typically crystallizes at normal ambient temperatures.

EBECRYL® 7100 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7100 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Unlike conventional tertiary amines such as N-methyldiethanolamine, EBECRYL® 7100 reacts to become part of the UV cured polymer, resulting in lower residual odor and improved moisture resistance. EBECRYL® 7100 also promotes adhesion to plastic substrates and lowers viscosity when used as a primary component in UV adhesives and coatings.

EBECRYL® 8409 is a low viscosity aliphatic urethane diacrylate. Films of EBECRYL® 8409 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and excellent exterior durability. Low viscosity coatings or enhanced performance via increased oligomer content are possible with EBECRYL® 8409. Note that EBECRYL® 8409 typically develops a semi-crystalline aspect upon storage.

UCECOAT® 6560 is an aliphatic urethane acrylate solution in water, containing approx. 50% acrylated products. The UCECOAT® 6560 is organo-tin free and highly recommended as primer for wood applications. Films containing UCECOAT® 6560 and cured by ultraviolet light (UV) or electron beam (EB) exhibit a nice optical aspect on different woods. Stability problems can occur if more water is added. Therefore, we recommend to use the EBECRYL® 11 produced by allnex.

EBECRYL® 284 is an aliphatic urethane diacrylate diluted 12% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). Films of EBECRYL® 284 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and flexibility, and are resistant to yellowing.

EBECRYL® 8894 is an aliphatic urethane acrylate, diluted in butyl acetate, designed for applications requiring high humidity and abrasion resistance. Films of EBECRYL® 8894 cured via exposure to ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, good toughness and flexibility, as well as the non-yellowing properties typical of an aliphatic urethane.

EBECRYL® 8405 is an aliphatic urethane tetraacrylate diluted 20% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). Films of EBECRYL 8405 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, and adhesion with excellent exterior durability and resistance to yellowing.

EBECRYL® 210 is an aromatic urethane diacrylate. Films of EBECRYL 210 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, low color and good adhesion to various substrates.

EBECRYL® 8411 is an aliphatic urethane diacrylate diluted 20% by weight with the reactive diluent isobornyl acrylate (IBOA). Films of EBECRYL® 8411 cured by ultraviolet light (UV) or electron beam (EB) exhibit exceptional extensibility and flexibility, in addition to excellent abrasion resistance, good adhesion, exterior durability and resistance to yellowing.

EBECRYL® 3605 is a partially acrylated ester of a bisphenol A type epoxy resin. It contains both acrylate and epoxy functionalities. This resin may be cured by exposure to either ultraviolet light (UV) or electron beam (EB) in conjunction with conventional epoxy curing. It may also be cured with UV radiation using a mixed photoinitiator system consisting of free radical and cationic photoinitiators. Ebecryl®3605 has been developed for applications requiring improved coating performance properties over those obtainable with conventional UV/EB curing alone.

EBECRYL® 767 is used in radiation-curable coatings and functions as a binder and resin in CASE ingredients.

EBECRYL® 450 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 450 provides the proper hydrophilic-lipophilic balance necessary for lithography, combined with high reactivity when cured by ultraviolet light (UV) or an electron beam (EB). Lithographic inks based on EBECRYL® 450 display outstanding printing qualities, including excellent ink transfer, good dot definition, and proper tack and rheological properties.

EBECRYL® 250 is an undiluted high molecular weight aliphatic urethane diacrylate resin, characterized by its light color and lower viscosity. Films of EBECRYL® 250 cured by exposure to ultraviolet light (UV), electron beam (EB) or by means of peroxide are soft and flexible, exhibiting the inherent non-yellowing properties typical of an aliphatic urethane. This resin is most often used as an additive to improve the flexibility of finished formulations.

EBECRYL® LEO 10502 is a low viscosity polymeric tetrafunctional polyether acrylate that provides low extractables, low odor and low migration after UV or EB curing. EBECRYL® LEO 10502 is recommended for use in low odor and low migrating UV/EB curable overprint varnishes (OPV’s) and inks.