Products

EBECRYL® 8604 is an aliphatic urethane tetraacrylate. As the main resin, EBECRYL 8604 offers excellent reactivity combined with good hardness and toughness. As a co-resin, EBECRYL 8604 blended with higher functional (penta or greater) oligomer(s) improves reactivity and weatherability while increasing the ductility with minimum impact surface hardness. Films of EBECRYL 8604 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, hardness, and excellent exterior durability.

EBECRYL® 3700-20T is the bisphenol A epoxy diacrylate, EBECRYL 3700, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1), to provide a lower viscosity, easier handling product. EBECRYL 3700- 20T exhibits very fast cure response and low odor. Films of EBECRYL® 3700-20T cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, scratch resistance, and excellent chemical resistance.

EBECRYL® 3700 is the diacrylate ester of a bisphenol A epoxy resin, and exhibits low odor and exceptional cure response. Films of EBECRYL® 3700 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness, high gloss, and excellent chemical resistance. EBECRYL® 3700 finds broad use in UV/EB applications, such as coatings, overprint varnishes, inks, adhesives, and electronics.

EBECRYL® 3721 is a modified bisphenol A epoxy diacrylate resin. EBECRYL® 3721 demonstrates increased toughness in ultraviolet light (UV) or electron beam (EB) energy cured coatings compared to standard epoxy acrylates while maintaining high reactivity and superior chemical resistance.

EBECRYL® 113 is a low odor monofunctional acrylated aliphatic epoxy that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. EBECRYL® 113 is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg, increase flexibility and improve adhesion to plastics.

EBECRYL® 4827 is an aromatic urethane diacrylate. Films of EBECRYL® 4827 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, low color and good adhesion to various substrates.

EBECRYL® 3720-TP25 is the bisphenol A epoxy diacrylate, EBECRYL 3720, diluted 25% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 3720-TP25 exhibits light color and fast cure response. Films of EBECRYL 3720-TP25 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and the superior chemical resistance typical of an epoxy resin.

EBECRYL® 3702 is a fatty acid modified bisphenol A epoxy diacrylate that exhibits outstanding flow and leveling and pigment wetting properties. Films of EBECRYL® 3702 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, improved water resistance and good chemical resistance.

EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® P115 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Recommended levels are from 5 to 15% based on the total formulation, usually combined with 3-5% photosensitizer. EBECRYL® P115 can be used with EBECRYL® P39 (1) (a polymeric benzophenone derivative) to produce UV cured coatings and inks with low residual odor.

EBECRYL®741 is an adhesion promoting resin with excellent pigment dispersion properties for radiation curable screen inks. It is designed for general purpose application on many treated plastic substrates. It can also be used as a let-down resin in combination with EBECRYL® epoxy acrylates, polyester acrylates and urethane acrylates.

TEGO® Foamex N provide sut most effectiveness against macro- and microfoam in solventborne, radiation-curing, and high solids coatings.

EBECRYL® 284 is an aliphatic urethane diacrylate diluted 12% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). Films of EBECRYL® 284 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and flexibility, and are resistant to yellowing.

TEGO® AIREX 978 is a very strong deaerator concentrate that provides excellent effectiveness against micro- and macro-foam in solvent borne, radiation-curing and high solids coatings and inks. Very suitable for high build and high viscosity applications.

EBECRYL® 3720 is a bisphenol A epoxy diacrylate that is the industry standard in performance and consistency. It exhibits light color and fast cure response. Films of EBECRYL® 3720 cured via exposure to ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness, gloss and excellent chemical resistance. EBECRYL® 3720 finds broad use in UV/EB applications, such as inks, coatings, and overprint varnishes and offers improved formulation stability.

UCECOAT® 6569 is a water dilutable aliphatic urethane acrylate oligomer containing approx. 5% water. UCECOAT® 6569 can be used to formulate UV/EB curable waterborne wood coatings as well as screen printing inks and varnishes. Cured films containing UCECOAT® 6569 demonstrate good adhesion to a variety of wood types, along with good flexibility, resistance to yellowing, and resistance to water and solvents. UCECOAT® 6569 based coatings can be re-coated after curing.