Products

EBECRYL® 8604 is an aliphatic urethane tetraacrylate. As the main resin, EBECRYL 8604 offers excellent reactivity combined with good hardness and toughness. As a co-resin, EBECRYL 8604 blended with higher functional (penta or greater) oligomer(s) improves reactivity and weatherability while increasing the ductility with minimum impact surface hardness. Films of EBECRYL 8604 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, hardness, and excellent exterior durability.

EBECRYL® 3721 is a modified bisphenol A epoxy diacrylate resin. EBECRYL® 3721 demonstrates increased toughness in ultraviolet light (UV) or electron beam (EB) energy cured coatings compared to standard epoxy acrylates while maintaining high reactivity and superior chemical resistance.

UCECOAT® 6569 is a water dilutable aliphatic urethane acrylate oligomer containing approx. 5% water. UCECOAT® 6569 can be used to formulate UV/EB curable waterborne wood coatings as well as screen printing inks and varnishes. Cured films containing UCECOAT® 6569 demonstrate good adhesion to a variety of wood types, along with good flexibility, resistance to yellowing, and resistance to water and solvents. UCECOAT® 6569 based coatings can be re-coated after curing.

EBECRYL® 5848 is an epoxidized soya oil acrylate based in part on renewable resources. EBECRYL® 5848 provides improved flow, leveling and pigment wetting in ultraviolet light (UV) or electron beam (EB) energy curable inks and coatings. Adhesion and flexibility are often enhanced when EBECRYL® 5848 is used as a modifier in inks and clear or pigmented coatings on paper and metal.

EBECRYL® 8409 is a low viscosity aliphatic urethane diacrylate. Films of EBECRYL® 8409 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and excellent exterior durability. Low viscosity coatings or enhanced performance via increased oligomer content are possible with EBECRYL® 8409. Note that EBECRYL® 8409 typically develops a semi-crystalline aspect upon storage.

EBECRYL® 8702 is an aliphatic urethane hexaacrylate that offers a multitude of performance properties allowing the formulator the flexibility to meet requirements. Films using EBECRYL® 8702 cured by ultraviolet light (UV) or electron beam (EB) exhibit a combination of hardness, abrasion and impact resistance coupled with good exterior durability.

EBECRYL® 8411 is an aliphatic urethane diacrylate diluted 20% by weight with the reactive diluent isobornyl acrylate (IBOA). Films of EBECRYL® 8411 cured by ultraviolet light (UV) or electron beam (EB) exhibit exceptional extensibility and flexibility, in addition to excellent abrasion resistance, good adhesion, exterior durability and resistance to yellowing.

EBECRYL® 303 is a polymeric resin diluted 45% with the monomer 1,6-hexanediol diacrylate (HDDA)(1). This material is designed to be used alone or in combination with other UV/EB curable oligomers to provide improved adhesion of inks and coatings on plastic substrates.

EBECRYL® 3420 is a low viscosity, modified epoxy acrylate with good pigment wetting ability. In UV offset, the final ink produced with this resin exhibits an enhanced ink water balance and good misting. EBECRYL® 3420 can be used to produce a UV flexo ink with good flow, high gloss and high reactivity.

EBECRYL® 605/40 is a bisphenol A epoxy diacrylate diluted approximately 40% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 605/40 exhibits light color and fast cure response. Films of EBECRYL 605/40 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and superior chemical resistance.

EBECRYL® 1859 is a high molecular weight acrylate especially developed for high speed UV, HUV, UV LED, and EB cured offset lithographic inks. EBECRYL® 1859 exhibits excellent lithographic behavior, very good pigment wetting and high reactivity.

EBECRYL® 3701 is a modified bisphenol A epoxy diacrylate. EBECRYL® 3701 imparts flexibility and toughness to ultraviolet light (UV) or electron beam (EB) cured coatings and inks while maintaining such desirable properties as fast cure response and superior chemical resistance that are typical of standard epoxy acrylates.

EBECRYL® 860 is an epoxidized soya oil acrylate especially suited to improving the flow and leveling of ultraviolet light (UV) or electron beam (EB) curable inks and coatings. Pigment wetting and adhesion are often enhanced when EBECRYL® 860 is used as a modifier in inks and clear or pigmented coatings on paper and metal.

EBECRYL® 8405 is an aliphatic urethane tetraacrylate diluted 20% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). Films of EBECRYL 8405 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, and adhesion with excellent exterior durability and resistance to yellowing.

EBECRYL® 3600 is an amine modified bisphenol A epoxy acrylate that exhibits exceptionally fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 3600 cured by UV or electron beam (EB) demonstrate high gloss and hardness combined with excellent chemical resistance. The amine modification can also improve adhesion to plastics.