Products

AEROSIL® 300 is a hydrophilicfumed silica with a specific surface area of 300 m²/g. Itprovides a verystrong rheologicaleffect.

TPGDA-A is a difunctional reactive diluent with a branched alkyl polyether backbone. Polymerization occurs when TRIPROPYLENE GLYCOL DIACRYLATE is exposed to sources of free radicals. It is widely used as a primary diluent in the formulation of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. TRIPROPYLENE GLYCOL DIACRYLATE is a grade of tripropylene glycol diacrylate with lower inhibitor content than the standard grade (TPGDA).

EBECRYL® 110 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. EBECRYL® 110 is used in ultraviolet light (UV) or electron beam (EB) cured coatings to control viscosity and increase flexibility.

EBECRYL® 140 is ditrimethylolpropane tetraacrylate, a reactive diluent exhibiting good cure response and light color. The addition of relatively small amounts of EBECRYL® 140 to ultraviolet light (UV) and electron beam (EB) curable coatings and inks can provide substantial improvements in cure response, hardness, and chemical, scratch, and abrasion resistance. EBECRYL® 140 is particularly useful in lithographic offset inks and overprint varnishes.

EBECRYL® 118 is an aromatic monofunctional acrylate that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. EBECRYL® 118 is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg and increase flexibility of the UV/EB cured polymer while maintaining strength and toughness and improving substrate adhesion.

EBECRYL® 113 is a low odor monofunctional acrylated aliphatic epoxy that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. EBECRYL® 113 is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg, increase flexibility and improve adhesion to plastics.

TPGDA is a difunctional reactive diluent with a branched alkyl polyether backbone. Polymerization occurs when TPGDA is exposed to sources of free radicals. It is widely used as a primary diluent in the formulation of ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks.

EBECRYL® PEG200DMA (polyethylene glycol di-methacrylate), CAS N° 25852-47-5, is a difunctional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® PEG200DMA forms homopolymers and copolymers. EBECRYL® PEG200DMA is compatible with a wide range of acrylated and methacrylated resins.

Acrylated Dipentaerythritol (DPHA) is a multifunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPHA is particularly useful in ultraviolet light (UV) and electron beam (EB) curable coatings and inks where improved cure response, hardness, and scratch/abrasion resistance are desired. DPHA is composed predominately of the penta- and hexa-acrylate esters of dipentaerythritol, with the overall composition represented by the included chemical structure.

EBECRYL® 150 is an ethoxylated bisphenol A diacrylate commonly used as reactive diluent in UV/EB cure applications. EBECRYL® 150 can improve the cure response, hardness, and chemical resistance of UV/EB curable coatings and inks while maintaining good adhesion, and without imparting brittleness.

EBECRYL® 180 is a multifunctional reactive diluent with a high degree of acrylic unsaturation and finds use in a variety of ultraviolet light (UV) and electron beam (EB) curable coatings and ink systems where a high degree of crosslinking is desired. EBECRYL® 180 is a mixture of predominantly the tri- and tetra-acrylate esters of pentaerythritol. EBECRYL® 180 has a higher ratio of tetra- to tri-acrylate ester than the similar product PETIA, and therefore typically crystallizes at normal ambient temperatures.

PETIA is a multifunctional reactive diluent with a high degree of acrylic unsaturation and finds use in a variety of ultraviolet light (UV) and electron beam (EB) curable coatings and ink systems where a high degree of crosslinking is desired. PETIA is a mixture of predominantly the tri- and tetra-acrylate esters of pentaerythritol. PETIA has a higher ratio of tri - to tetra-acrylate ester than the similar product EBECRYL 180, and therefore remains liquid at normal ambient temperatures.

TMPEOTA is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. TMPEOTA can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and toughness. Of the common triacrylate diluents used in energy curable formulations, TMPEOTA exhibits the highest reactivity and the greatest viscosity reduction of oligomers.

IBOA is a monofunctional reactive diluent that polymerizes when exposed to sources of free radicals. The bicyclic structure of IBOA gives rise to polymers of increased Tg, while its monofunctionality minimizes crosslinking to provide coatings and inks with good hardness and resiliency combined with flexibility and impact resistance.

EBECRYL® 130 is a cyclic aliphatic diacrylate useful as a reactive diluent in UV (ultraviolet) or EB (electron beam) curable coatings and inks. EBECRYL® 130 can impart a combination of hardness, toughness, and resiliency coupled with improved adhesion properties on various substrates. EBECRYL® 130 can also significantly increase the Tg of cured polymers. EBECRYL® 130 is particularly useful for scratch resistant coatings an plastics and as a pigment grinding vehicle for UV inkjet inks.