Products

Additin® RC 3775 is a chemical blend used as an anti-wear agent and extreme pressure additive in gear oils, hydraulic oils, industrial oils, metalworking fluids, and turbine & compressor fluids. It is applied at a dosage of 0.2-1.5% (w/w). The product provides excellent wear protection, extreme pressure performance, good load-carrying capacity, high viscosity, and is an ashless additive suitable for various lubricating applications such as compressor oils, honing oils, and turbine oils.

Additin® RC 5202 is a chemical blend used as an extreme pressure additive in metalworking fluids, including semi-synthetic and synthetic formulations. It is mineral oil-free and provides enhanced extreme pressure performance, making it suitable for a variety of metalworking applications.

Additin® M 49.002 is a anticorrosion, Lubricity Additive and Film Former.

Additin® RC 7120 is a single-ingredient antioxidant used in gear oils, hydraulic oils, metalworking fluids, and turbine & compressor fluids. It provides excellent oxidation stability, making it suitable for use in compressor oils, gear oils, hydraulic fluids, metalworking fluids, and turbine oils.

Additin® RC 2516 is a deactivated, medium active, light colored, low odor, high viscosity sulfur carrier with good solubility even in nonpolar base oils. Due to its excellent polarity and lubricity in combination with a controlled sulfur activity, it is particularly suited for manufacturing metalworking fluids for medium to heavy duty stamping, fine blanking and metal forming processes. The low copper corrosivity makes it also suitable for machining yellow metal alloys. It is also highly recommended for the formulation of EP greases, slideway oils and industrial gear oils.

Additin® RC 4810 is an amine-free corrosion inhibitor used in metalworking fluids. It provides corrosion inhibition, excellent emulsifiability, lubrication, and wear protection. The product is suitable for use in anti-rust oils, dewatering fluids, metalworking fluids, and mold release oils. It also acts as an ashless additive.

NIONIC™ 31R1 Surfactant is a reverse block copolymer surfactant with a chemical structure designed to provide reduced foaming and gelling tendencies compared to non-reverse block copolymer surfactants. NIONIC™ 31R1 Surfactant can be used to reduce the surface tension of liquids, including high viscosity liquids even at very low concentrations. The unique features are extremely low toxicity, defoaming activity, wetting, cleaning, emulsification, and chemical and thermal stability.

Calcinate® C-70 is a 70 TBN oil soluble overbased calcium sulfonate. It has an optimized Soap-to-TBN ratio to provide excellent corrosion inhibition and detergency. CalcinateTM C-70 is designed to remove health concerns over the presence of barium heavy metal coming from overbased barium sulfonates. CalcinateTM C-70 is compatible with Group I, II, and III base oils as well as Group IV synthetic base stocks.

Additin® RC 4530 is a corrosion inhibitor used in gear oils, greases, and metalworking fluids. It provides high-performance corrosion inhibition, making it suitable for a variety of lubricating applications.

Bioban® O 45 Antimicrobial previously sold as SKANETM M-8 Microbicide, is a highly effective industrial mildewcide recommended for coatings, latex and solvent based paints, semitransparent stains and solid stains, building materials including elastomeric roof and wall coatings, caulks, sealants, joint cements, spackling, stucco, and grout, wallpaper pastes and adhesives, aqueous adhesives and tackifiers, and leather. BIOBANTM O 45 antimicrobial offers effective, broad-spectrum protection against fungi (yeast and mold) in the wet state during manufacture and storage as well as dry-film protection against mold and mildew following application of the coating/building material.

Additin® RC 3058 is an anti-wear agent and antioxidant with hydrolytic stability. It is suitable for use in gear oils, greases, hydraulic fluids, and metalworking fluids.

ISOCARB ESTER 1605 is a polyol ester used in lubricants within base chemicals.

Focus Base SB 314 is used in fluids & lubricants for metalworking fluids. It functions as an emulsifier.

Additin® M 82.001 is an ashless additive used in a variety of fluids and lubricants, including compressor oils, gear oils, greases, hydraulic fluids, metalworking fluids, and turbine oils. It serves as an extreme pressure additive and metal deactivator. Additionally, it is utilized in industrial applications, specifically for crude oils, where it functions as a metal deactivator.

ISOCARB 24 are primary saturated carboxylic acids with defined branching of the carbon chain. These products are derived from the oxidation of Guerbet alcohols and are available with even numbered carbon chain lengths of 12 to 32.